Quest Engineering WIREFREE PRO Instruction Manual

SAFETY INSTRUCTIONS
• When wearing the headphones, make sure the volume is turned to minimum. Only adjust the volume after
putting the headphones on. Do not turn the volume up too loud. You could cause permanent damage to your
hearing.
• Danger to life! Headphones dramatically reduce your ability to hear ambient noise. Using headphones while in
road traffic is potentially very dangerous and is therefore prohibited by law. Also, please make sure that you do
not use your headphones when in the vicinity of possibly dangerous machines and tools.
• This product's wireless 2.4G technology has a transmission range of approx. 10 meters, but interfering obstacles (people,
metal objects, walls, etc.), other radio siqnals, and other factors may affect the transmission ranqe or even lead to the
loss of the connection.
INSTRUCTION MANUAL
WIREFREE PRO
QUICK START
Step 1. Power on the transmitter
Make sure the transmitter is fully
charged and press the power button
for 2 seconds. The LED indicator will
start to flash red. The LED indicator
will turn still when connected with
any headphones. The headphones
and transmitter have been paired
before packing.
Step 2. Power on the headphones
Press and hold the power button for
2 seconds to power on. The status
LED will start blinking when powered
on. The headphones will connect
to the last paired, powered on
transmitter automatically.