Advertisement
Quick Links
EP-3450
Automatic Strap Cutter
full instructions
IT IS THE RESPONSIBILITY OF THE CUSTOMER TO ENSURE THAT
ALL OPERATORS AND SERVICE PERSONNEL HAVE FULLY READ
AND UNDERSTOOD THIS DOCUMENT
READ ALL INSTRUCTIONS BEFORE OPERATING TOOLS.
FAILURE TO FOLLOW ANY OF THESE GUIDELINES COULD
RESULT IN SERIOUS OR FATAL INJURY
P (847) 735-8105 | F (847) 735-8297
sales@encorepack.com | www.encorepack.com
201 Park Avenue, Lake Villa, IL 60046
MADE IN THE USA
P.O. Box 595, Winnetka, IL 60093
Edition 8/15/2024
Advertisement
Summary of Contents for Encore EP-3450
- Page 1 EP-3450 Automatic Strap Cutter full instructions IT IS THE RESPONSIBILITY OF THE CUSTOMER TO ENSURE THAT ALL OPERATORS AND SERVICE PERSONNEL HAVE FULLY READ AND UNDERSTOOD THIS DOCUMENT READ ALL INSTRUCTIONS BEFORE OPERATING TOOLS. FAILURE TO FOLLOW ANY OF THESE GUIDELINES COULD...
-
Page 2: Loading Instructions
Please read our Terms & Conditions carefully prior to using or obtaining any materials, information products 4. After the disks are holding the roll properly, or services of Encore Packaging LLC, an Illinois limited liability company with a place of business at 201 Park insert the wing nut onto the spindle and secure Avenue, Lake Villa, IL 60046. - Page 3 6. Twist the emergency stop knob to the right to 1. Prior to taking the motor housing off of the EP-3450, make sure the battery is disconnected and that the bottom in the middle of the cart. The length of the turn on the unit.
- Page 4 STRAP EXIT GUIDE REPLACEMENT INSTRUCTIONS Step 1 Step 3 1. Carefully remove the Feedbox from the Cart Tray by unscrewing the 4 screws located underneath the 3. Once removed, use the 5/32” Allen key to unscrew the Exit Strap Guide. When it’s off, replace it with the Cart Tray.
- Page 5 EP-3450 5. Place the Feedbox back into the cart and secure it onto the Cart Tray by using the 4 screws to attach it 1. Turn the EP-3450 on and access the home screen. underneath, using the 5/32” Allen key.
- Page 6 Volts E3450-090123L 3. The screen will show voltage and software build information. Touch the Encore Packaging button on 5. Once it’s set, go back to the home screen and input the desired speed, length, and cut amounts. the top right.
- Page 7 EP-3450 Parts List ITEM NO. PART NUMBER DESCRIPTION QTY. E3450-45 Feed Box E3450-64 Wheel Axle Spacer E1620-33 Socket Cap Screw E3080-02 Wheel Washer E3080-06 Axle Cap Nut E3100-02 Wing Nut E3100-03 Retaining Ring E3340-01-C Universal Spindle E3340-04 Brake Assembly E3340-04-F...
- Page 8 This page have been intentionally left blank This page have been intentionally left blank Page Page...
- Page 9 P (847) 735-8105 | F (847) 735-8297 201 Park Avenue, Lake Villa, IL 60046 MADE IN THE USA sales@encorepack.com | www.encorepack.com P.O. Box 595, Winnetka, IL 60093...
Need help?
Do you have a question about the EP-3450 and is the answer not in the manual?
Questions and answers