Advertisement
Quick Links
Hinge block with liner pocket assembly PD6275
for CW2023 / CW2024 / CW2080 / CW2086
45L / 55L liner rim step can
Removing hinge block with liner pocket
1. Open lid and liner rim and push back until it is locked into
place.
3. Tape down the circled parts shown below with masking
tape or painter's tape.
install guide
liner rim step can hinge block replacement
PD6275 | www.simplehuman.com | 121-0136-01
Tools you need:
Phillips-head screwdriver
2. Remove lid assembly from can body by pinching center
tabs and pulling lid assembly upward.
4. Remove the 4 screws using a Phillips-head screwdriver.
video guide
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for simplehuman PD6275
Summary of Contents for simplehuman PD6275
- Page 1 Hinge block with liner pocket assembly PD6275 Tools you need: Phillips-head screwdriver for CW2023 / CW2024 / CW2080 / CW2086 45L / 55L liner rim step can video guide Removing hinge block with liner pocket 1.
- Page 2 1. Replace the new back panel onto the back of the body. 2. Insert screws into the 4 holes and screw in using Phillips-head screwdriver. 3. Remove all tape. 4. Pinch center tabs and place lid assembly onto the can. PD6275 | www.simplehuman.com | 121-0136-01...
- Page 3 5. Close lid. Final Result product questions or returns customer.support@simplehuman.com PD6275 | www.simplehuman.com | 121-0136-01...
Need help?
Do you have a question about the PD6275 and is the answer not in the manual?
Questions and answers