Page 1
43012 Rev 1 7/7/04 1:03 PM Page 1 Hardware stainless steel kettle Please read and keep these instructions getting the best from your new kettle... • This kettle does not have an opening lid • Empty the water out of the kettle after first boiling To clean away any deposits that are left in the kettle after the manufacturing process...
43012 Rev 1 7/7/04 1:03 PM Page 2 • Do not let the lead run across a cooker Important safety or toaster or other hot area which might damage the cable. instructions • Do not place the kettle where the mains lead could fall into a sink.
43012 Rev 1 7/7/04 1:03 PM Page 3 • The use of attachments or tools not ⁄ recommended or sold by Morphy ‡ Richards may cause fire, electric shock or injury. • Do not attempt to connect any other appliance to the base unit or this appliance to another base unit.
43012 Rev 1 7/7/04 1:03 PM Page 4 Using Filter removal 1 Please note that this kettle does not 1 Pull the filter forwards and lift the filter have an opening lid, fill through the upwards to remove. spout, with the filter in place this helps to 2 To refit the filter, slide it into the side wall free the filter from limescale build-up.
Page 5
43012 Rev 1 7/7/04 1:03 PM Page 5 Descaling Cleaning IMPORTANT: As this kettle is fitted with WARNING: Always disconnect the a concealed element it must be descaled plug from the mains and allow the regularly. Frequency of descaling depends kettle to cool before cleaning.
Page 6
4 Where the appliance has been used for Model number and Serial number on the hire purposes or non domestic use. product, or write to Morphy Richards at the 5 Morphy Richards are not liable to carry address shown. out any type of servicing work, under the You will be asked to return the product (in guarantee.
Need help?
Do you have a question about the IB43012 and is the answer not in the manual?
Questions and answers