HOMCOM 700-105 Assembly Instructions Manual page 8

(1)X1
1
1) Posi on the Massage Chair back so that it fits into the seat, you
will hear a "click" when it is in place.
2
4
3) Connect the masssage
supply cable pins.The pins
must be connected correctly. Fit the
pins properly in the manner shown
in the image. Do not force them,
they only have one correct posi on.
Assembly Instructions:
(2)X1
(1)
(2)
(3)
(4)
3
(3)X1
3
4) Pull out the trigger on the right
side of the chair and the footrest
will extend, push the backrest
with your back con nuously un l
it reachs the maximium degree.
NOTICE: THE BACK CAN'T
MAINTAIN IN THE MAXIMIUM
DEGREE WITHOUT PUTTING A
WEIGHT ON IT.
(4)X1