Make sure that the power supply voltage corresponds to that indicated on the nameplate (located on the right side of the device). BIOW UK LTD., as the manufacturer of this product, is responsible for its safety and proper operation, provided that: If the power cable is damaged, it must be •...
Page 5
B R E A T HE - R E S T - R E G E N E R A T E PRECAUTIONS Before cleaning or maintenance work is carried out, the Antiox Prime must be disconnected from the wall socket and/or the device switch...
Antiox Prime WEIGHTS AND DIMENSIONS IMPORTANT Model description: Antiox Prime Do not modify this device Dimensions: 708 x 260 x 190 mm without the manufacturer’s explicit authorization.
(WEEE) It is forbidden to sit on this device 1.6. INSTALLATION The Antiox Prime has two lateral supports that allow the device to be placed comfortably on a piece of furniture or flat surface shelf, without the need for installation.
Page 8
BR EATHE - R EST - R E GE NE R AT E ALTERNATIVE WALL MOUNTING If you wish to fix the Device to the wall, a mounting kit can be supplied upon request, , consisting of screws (8mm dowels and screws). To do this, follow the steps below: •...
B R E A T HE - R E S T - R E G E N E R A T E 2. OPERATION OF THE BIOW ANTIOX PRIME 2.1. START-UP • Connect the Antiox Prime to an earthed socket. • Check that the switch is in the ON position. If not, turn the device on at the ON/OFF switch located on the right side of the device, indicated in the image below.
• - Turn the device on at the switch located on mode or to change the operating mode to the right-hand side of the Antiox Prime. Manual mode or Manual Night mode the MODE button of the remote control, being able to modify any parameter.
Anion emitter in a bioavailable state. PLASMA LIGHT. Enables internal sterilisation of the device and activates Plasma generator the plasma generator for more intense anionic care. and internal Does not generate ozone. sterilization 02 OPERATION OF THE BIOW ANTIOX PRIME...
Page 12
AUTO 1, AUTO 2, AUTO 3, AUTO 4, AUTO 5 y AUTO 6 + BUTTON In AUTO mode it is used to increase the power. -BUTTON In AUTO mode it is used to decrease the power. 02 OPERATION OF THE BIOW ANTIOX PRIME...
AUTO 6 being the most intense. There are two methods to change the selected sub-mode: Pressing the main button will cycle through the sub-modes. When AUTO 4 is reached, pressing the button again will return to AUTO 1. 02 OPERATION OF THE BIOW ANTIOX PRIME...
PLASMA LIGHT (plasma generator and sterilisation). 2.8. MANUAL NIGHT MODE The Antiox Prime has an optical sensor that measures the amount of light in the room where the device is located. When the Inducer is working in night mode, it will operate normally, but the display will be dimmed.
Indicates that the heat treatment has been activated. The display values will turn orange to differentiate it from when it is not Heat Function activated. The operating mode of the Antiox Prime is indicated on the right- hand side of the display by four different icons:: Operating Mode AUTO...
During the warranty period and in order to be able to make use of it in case of breakdown, only the BIOW UK LTD. Technical Service is authorised to carry out any repair or replacement of the elements that make up the Antiox Prime, with the exception of changing the maintenance pack.
It is a very simple process, so you can dismantle IMPORTANT the maintenance pack yourself. Lift the front part of the device, allowing access to the BIOW UK LTD. only guarantees the maintenance pack, and pull it out horizontally effectiveness of the Biow Antiox for replacement.
PT and ten numbers (PTXXXXXXXXXXXXXXXXXX) BIOW UK LTD. ATTENTION Contact Us 01782 472 444 BIOW UK LTD. is not responsible Device 15, Oldfields Business Park for device repaired by a non-official Stoke-on-Trent ST4 3PE, Deviceed Kigndom technical service www.biow.co.uk...
BR EATHE - R EST - R E GE NE R AT E 4.3. BIOW UK LTD. LIMITED WARRANTY • Biow UK Ltd. warrants that the product, at the time of its original purchase, is free from defects in materials and workmanship. This...
The total or partial reproduction of photographs, catalogues, designs, brands and content of the website, by any means or procedure, is prohibi- ted without the prior, express and written authorisation of BIOW UK LTD. Any form of unauthorised use will be prosecuted in accordance with the provisions of Industrial and Intellectual Property legislation.
Page 22
DATOS TÉCNICOS / MODELO/MODEL POTENCIA/POWER TECHNICAL DATA BIOW ANTIOX PRO 230V/50Hz IP 21 523 W BIOW ANTIOX PRIME sido fabricado conforme especificaciones técnicas producto cumple todas las normas vigentes, particular: It has been manufactured according to the technical specifications of the product and it conforms in all respect to the...
Page 24
B REAT H E - RE ST - R EG EN ERA TE BIOW UK LTD. Contact Us 01782 472 444 Device 15, Oldfields Business Park, Stoke-on-Trent ST4 3PE, Deviceed Kigndom www.biow.co.uk www.biow.co.uk biow_uk UKBiow Ref.: CO11000010 Rev. 1 11/10/24...
Need help?
Do you have a question about the ANTIOX PRIME and is the answer not in the manual?
Questions and answers