(see pg. 9). These connections must be made using supplied SK-4 connector sealing kit. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: LU9-HHLOL rev2319.docx Page 5 of 20 Rev Date: 5-10-2023...
Page 6
All connections are made using the supplied SK-4 connector kit. ¾” NPT ¾” NPT 2 x ¾” reducer 2 x ¾” reducer OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: LU9-HHLOL rev2319.docx Page 6 of 20 Rev Date: 5-10-2023...
Page 7
(see pg. 9). Connect sensor wires in central junction box to control unit cable(s) and use SK-4 connector sealing kit. 4” x ¾” reducer OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: LU9-HHLOL rev2319.docx Page 7 of 20 Rev Date: 5-10-2023...
NOTE: To maintain proper shielding, BLACK sensor wires and SHIELD DRAINS should not be connected together at sensors. OMNTEC Mfg., Inc., 2420 Pond Road, Ronkonkoma, NY 11779 Phone (631) 981-2001 Fax (631) 981-2007 www.OMNTEC.com File Name: LU9-HHLOL rev2319.docx Page 9 of 20 Rev Date: 5-10-2023...
Warranty on tank gauging systems will only be effective after proper documentation has been submitted by the buyer to OMNTEC Mfg., Inc. The seller’s sole obligation is to repair or replace parts found to be defective, or non-conforming for one year and only after evaluation by factory.
Need help?
Do you have a question about the LU9-HHLOL and is the answer not in the manual?
Questions and answers