Advertisement
44262 rev2:44262 12/11/2009 08:52 Page 6
The setting required will
vary according to the
moisture content and
thickness of the bread. For
best results, ensure that the
bread slices are of even
thickness, freshness and
size.
Remember that stale bread
toasts more rapidly than
fresh, and thin bread toasts
quicker than thick. See the
'Hints and Tips' section for
more information.
3
After selecting the desired
level, place your bread in
the slots ⁄ and depress
the bread carriage lever ¤
downwards until it locks.
Note: The bread carriage
lever will not stay down
unless the toaster is
plugged in and the wall
switch is on.
4
After the set time has been
reached, the bread will
pop-up automatically, ready
for removal from the slots.
The bread carriage lever
will have returned to it's
upper position and the
heating element will have
switched off, ready for the
next toasting.
•
If the first slices are not
dark enough, turn the
browning control to a
higher setting at next
toasting.
•
WARNING: If the bread
in your toaster becomes
jammed, disconnect
your toaster at the
socket, allow it to cool,
then remove the bread.
•
When not in use, switch
your toaster off at the
mains and remove the plug
from the socket.
DO NOT WRAP THE
CABLE AROUND THE
MAIN BODY OF THE
APPLIANCE DURING OR
AFTER USE. THE
CABLE STORAGE AREA
UNDERNEATH THE
TOASTER SHOULD BE
USED.
UK Helpline 0844 871 0957
4
Using the
frozen button
To toast frozen bread do
not adjust the browning
control from your normal
setting. Place the bread in
the bread slots depress the
bread carriage lever and
press the frozen button ‹.
The LED will illuminate and
the toaster will operate for
a longer period.
Using the
cancel button
If you wish to interrupt the
toasting process, press the
cancel button fi.
Using the
re-heat button
If your toast has popped up
and gone cold, the toaster
offers a re-heat facility. To
use, depress the bread
carriage lever and press the
re-heat button ›
immediately. The LED will
illuminate and the toaster
will operate for a short
period reheating the bread.
Crumb tray
WARNING: Crumbs will
accumulate in the
crumb tray and could
catch fire if not emptied
regularly.
When the appliance has
cooled down completely,
tap the sides of the case
lightly to dislodge any
crumbs lodged in the
toasting chamber and
remove the crumb tray fl
Empty the tray and replace
A.
Never operate the
appliance without the
crumb tray fitted.
Replacement Parts 0844 873 0723
A
CLEANING AND
MAINTENANCE
1
After use and before
cleaning, switch off at the
mains, remove the plug
from the wall socket and
wait for the toaster to cool.
2
Wipe the outside of the
toaster with a damp cloth
only and dry with another
cloth or tissue.
•
NEVER use metal polish or
coarse scouring agents and
never immerse your toaster
in any sort of liquid.
•
NEVER use any pointed or
sharp articles for cleaning
the inside, otherwise the
heating element will be
damaged.
•
NEVER use a brush or
push your fingers or metal
objects down the slots.
•
NEVER immerse your
toaster in water.
HINTS AND TIPS
•
In order to achieve uniform
browning, we recommend
you wait a minimum of 30
seconds between each
toasting, so that the control
can be automatically reset.
.
•
If toasting one slice only,
you may need to adjust the
browning control to a
slightly lower setting.
•
Note: you will also notice a
slight variation in toast
colour on one side of a
single slice.
Ireland Helpline 1800 409 119
Advertisement
