Advertisement
Quick Links
SOLAR POND OXYGENATOR
Item codes: M515
Instructions for Use
Please read and retain these instructions for future
reference
Power Details:
lithium-ion battery(3.7V 18650 2600mah)
Accessories:
3M cable
3W solar panel
2*1 M Oxygen tube
Please read this instruction manual thoroughly before starting and ensure you are familiar with the
operation of your new SOLAR POND OXYGENATOR.
User Instructions:
1. Connect the oxygen tube, bubble stone, check vale and other accessories according to the correct
method.
2. The oxygen pump should be placed on a smooth surface such as glass or ceramic tile to adsorb.
3.
Long press "
button(3 seconds) Indicating that it has been turned off . After booting, press the button to select the
desired mode, and the corresponding indicator light will be on.
4. Intermittent mode "
5. Continuous mode: " "： Always play oxygen continuously.
6. Energy-saving mode:" "： oxygen cycle from small to large and then from large to small
7.
The red light"
rapidly when power is low.
WARNINGS AND SAFETY INSTRUCTIONS:
WHEN USING ANY APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED:
•
READ ALL INSTRUCTIONS BEFORE USE.
•
FOR DOMESTIC OUTDOOR USE.
v001: 16/01/24
Built-in rechargeable
External DC 5V 1A input solar Panel(3w/6V)
Button Cell Compartment secured by screw.
" the button (3 seconds). Indicating that it has been turned on ,then press the
"： Run for 5secinds, pause for 3seconds, and cycle.
" is on when charging, and the green light is on when full. and the red light will flash
Advertisement
Summary of Contents for Gainsborough M515
- Page 1 SOLAR POND OXYGENATOR Item codes: M515 Instructions for Use v001: 16/01/24 Please read and retain these instructions for future reference Power Details: lithium-ion battery(3.7V 18650 2600mah) Built-in rechargeable External DC 5V 1A input solar Panel(3w/6V) Button Cell Compartment secured by screw.
- Page 2 • NOT FOR COMMERCIAL USE. • BEFORE USE, CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS ARE FOUND. TAKE CARE NOT TO DROP THE APPLIANCE AS HEAVY IMPACTS MAY CAUSE INTERNAL DAMAGE. • THE USE OF ANY ACCESSORY OR ATTACHMENTS NOT RECOMMENDED BY COOPERS OF STORTFORD MAY CAUSE INJURIES AND INVALIDATE ANY WARRANTY YOU MAY HAVE.
- Page 3 • SPENT OR EXPIRED BUTTON CELLS MUST BE DISPOSED SAFELY AWAY FROM CHILDREN ACCESS AND RECYCLED IN COMPLIANCE WITH YOUR LOCAL AUTHORITY REGULATIONS. • FOLLOW THE BATTERY MANUFACTURER’S SAFETY, USAGE, AND DISPOSAL INSTRUCTIONS. DISPOSAL • Coopers of Stortford use recyclable or recycled packaging where possible.
Need help?
Do you have a question about the M515 and is the answer not in the manual?
Questions and answers
The instructions are far too vague. Item 1 states that the oxygen tube, bubble stone, check valve and other accessories are connected to the correct method. What is that method? There is a USB connector supplied with the kit. What is that for and where does it fit within the system? How and where are the check valves fitted? Can you send a video or have someone call me please? 07506 674 018. Many thanks, Stewart
The correct method for connecting the oxygen tube, bubble stone, check valve, and other accessories for the Gainsborough M515 is as follows: connect each component according to its function—attach the oxygen tube to the pump, insert the check valve in the correct direction to prevent backflow, and connect the bubble stone at the end of the tube that goes into the water. The device should be placed on a smooth surface to adhere properly.
The USB connector (External DC 5V 1A input) is used to charge the built-in rechargeable lithium-ion battery. It connects to a power source such as a USB charger or power bank and fits into the DC input port of the system.
The check valves are fitted in-line within the oxygen tubing between the pump and the bubble stone, with correct orientation to prevent water from flowing back into the pump.
This answer is automatically generated
does both oxygen tubes get connected if so i only have 2 tubes do i need to cut them in half to insert the check valve