Frothing Milk - Morphy Richards 10-12 CUP FILTER COFFEE MAKER Manual

L
• Please note the jug lid must be in
place during the brewing process;
otherwise the non-drip valve will not
open, causing the filter to flood.
6 Select the required strength of
coffee using the strength selector
on the lid L.
7 Press the power on/off selection
M
button Û. The display lights up
brightly and the cup selection
indicator will flash showing the
previous selection.
NOTE:
If the machine has been unplugged
from the wall socket since the last
operation the previous selection will
be cleared, the default setting will
be applied (1 full carafe).
Press the cup selection button ¯ to
8
select one of the available options,
1/2 carafe or full carafe M
depending on the number of cups
required. Refer to 'Cup selection
function' page 10 for further
information. The selection indicator
will stop flashing, if no buttons are
pressed for 2 seconds the machine
will begin the brewing process.
9 The brewing indicator ˘ will start to
illuminate from left to right indicating
that brewing is in progress, hot
water will start to flow through the
coffee grounds and into the jug as
coffee ·.
• Glass Carafe Variant
When the brewing process is
complete the product will
automatically switch to keep warm
; the brewing indicator ˘ will
stop illuminating from left to right.
All segments will remain solidly
illuminated indicating the machine is
in keep warm state. The indicator
has now changed from a brewing
indicator to a quality indicator. Refer
to 'Coffee Quality indicator' page 11
for further information.
The automatic keep warm
function will keep the coffee warm
in the carafe until the product is
switched off.
For safety reasons the coffee maker
will automatically switch off after
two hours.
8
The anti-drip valve È will prevent
any remaining coffee dripping onto
the hot plate during serving. Ensure
that the jug is replaced on the hot
plate after serving.
We suggest consuming your coffee
within two hours, after this time we
suggest brewing another jug of
fresh coffee.
WARNING: The coffee maker and
hot plates are hot and remain hot
for some time after switching off.
NOTE:
• Remember to turn off the machine
when you have finished.
• Allow the unit to cool.
C B
D
• Remove the permanent filter and
A
E
empty the used coffee grounds.
Wash the filter immediately and dry
thoroughly.
• Thermal Carafe Variant
When the brewing process is
complete the product remains on,
the brewing indicator ˘ will stop
illuminating from left to right, all
segments will remain solidly
illuminated, the indicator has now
changed from a brewing indicator to
a quality indicator. Refer to 'Coffee
Quality indicator' page 11 for further
information.
If the coffee is to be consumed
immediately we recommend
switching off your coffee maker as
soon as brewing is complete.
NOTE:
If you switch off your coffee maker
the coffee quality indicator will turn
off and reset.
The thermal carafe will keep the
coffee warm in the jug for up to four
hours.
For safety reasons the coffee maker
will automatically switch off after
two hours.
The anti drip valve will prevent any
remaining coffee dripping onto the
base recess during serving.
We suggest consuming your coffee
within two hours, after this time we
suggest brewing another jug of
fresh coffee.
WARNING: The coffee maker the automatic timer function
and hot plates are hot and indicator will illuminate to show the
remain hot for some time after automatic timer function is set.
switching off.
• With the automatic function
NOTE: activated the coffee maker will turn
• Remember to turn off the machine on at the desired time and start to
when you have finished. brew the coffee.
• Allow the unit to cool. NOTE:
If the auto button ı is pressed
• Remove the permanent filter and during the brewing process the
empty the used coffee grounds. machine will switch off and the
Wash the filter immediately and automatic timer function will be
thoroughly. activated.
If setting the automatic timer
Set the automatic timer function during the brewing
process, wait until the process is
function
complete before pressing the auto
NOTE: button.
The timer function can be set when
Press the auto button ı again to
the coffee maker is brewing or when 6
it is in standby. cancel the automatic function, the
timer function indicator will
Press the programme button Ù.
1 disappear. The machine will keep in
The display will change to show the the memory the cup selection
previous set time and cup selection setting and the start time until it is
flashing. If no previous setting has unplugged from the mains socket.
been made or the machine has
been unplugged from the socket 7 To change the start time and the
since the last setting the default number of cups repeat steps 1-5.
setting will be shown; 12:00 and full
carafe. WARNING: Remember to fill the
water tank with water and the
2 Select ¯ the desired number of filter with coffee before
cups that want to be brewed, 1/2 or activating the auto function.
full carafe (see cup selection
function on page 10). The cup NOTE:
selector indicator will stop flashing. The clock is a 24 hour clock.
and minute ˜
3 Press the hour If no buttons are pressed, the
buttons to set the desired time. The display will revert to the time display
start time will stop flashing. within 5 seconds.
NOTE:

Frothing milk

The programming mode indicator
continues to flash to show the
display is still in programming It is advised to start heating your
mode. milk ready for frothing when you
start making the coffee. This helps
4 If the programme button Ù is to ensure the milk reaches its
pressed again or if no buttons are optimum frothing temperature.
pressed within 5 seconds the cup
selection setting and the start time 1 Fill the stainless steel jug fl with
are memorised. the required amount of milk. Do not
exceed the maximum level.
5 To activate the automatic timer
function press auto button ı. Place the jug on the hot plate Î N
2
and push the frother hot plate Â
ON/OFF switch to the 'ON' O
• The display will change to show the
programmed time and cup selection position, the hot plate indicator will
setting for 5 seconds. The display light up.
will then change to show the time,
g
N
O
9