Summary of Contents for Calion Power BE-EB-7KEU-01B
- Page 1 AC EV CHARGING STATION User manual Model B E-EB-7KEU-01B BE-EB-11KEU-02 BE-EB-22KEU-03B...
-
Page 2: Warranty
Warranty We warrants that products supplied to customer pursuant to this Agreement / Contract should Warning: Do not spray water or other liquids directly onto the wallbox. Do not spray water meet merchantable quality, all applicable safetystandards and free from any defect of design, on the charging handle or immerse the charging handle in liquid. - Page 3 Product parameter description Precautions Do not use a private generator as a charging power source; Parameter Technical index The working range is -30°C~50°C, please do not operate it at temperatures over this range; This product is strictly prohibited to be used after soaking in water, it can be used in normal Model name FE-W-EU-B70 FE-W-EU-B110...
-
Page 4: Product Function Introduction
External Structure Product function introduction 105.25 mm 217.12 mm indicator light Function introduction Function 36.39 Ac leakage protection automatically detects the AC mismatch between the power supply wires, which indicates that the Touch button Residual current current flows through the grounded (PE) wire. When the detection current is greater than 30 mA (AC) and 6mA (DC), the AC residual current fault protection device will trip. -
Page 5: Charging State
Charging station for 7kw EV charging station Charging state Charging state:Connected, Charging,Success Charging state for 11kw EV charging stations Accumulated charging power Display the accumulated 2022-10-12 16:12 00.0 KW.h charge (KWh) Current charging power Charging state:Connected, Power 00.0 Kw Charging time 230V Charging,Success Time... - Page 6 2. Connect to Bluetooth, plug in the charging pile, the screen displays a QR code, open the 3. Use your mobile phone to start charging. Bluetooth app on your phone, scan the code or use Bluetooth search (Smart EV) to pair. Set a password.
-
Page 7: Package Contents
Package Contents Installation Preparation Open the package, then check and verify following items after receiving the charger : Tools required Check the charger’s external appearance. If there is any breakage or other damage, please inform the seller immediately. Tool Name Photo Function All accessories quantity and type as follows. - Page 8 Checks before starting the installation process Requirements for safe power supply lines Ensure the charger’s location allows good operational access for normal use and repair & 1.Single-phase 32A current specification requirements: Use not less than 3-core 6-square maintenance. standard multi-stranded copper wire; when the power supply line is more than 40 meters, it should be thicker according to actual conditions.
- Page 9 Instructions 3. fix the Mounting backplane with self tapping screws(6*PM4*35mm) 1. When the machine is on standby normally, the indicator light is fixed blue. 2. Remove the charging gun from the holder, insert the charging gun into the car charging socket.
-
Page 10: List Of Hazardous Substances
List of Hazardous Substances Name and content identification of toxic and hazardous substances or elements in the product Hexavalent polybrominated Polybrominated Cadmium Lead chromium biphenyls diphenyl ethers S/N Part Name (cd) (Pb) (Hg) (Cr v) (PBB) (PBDE) lower shell Cover assembly Exterior panel Motherboard Gun&wire...
Need help?
Do you have a question about the BE-EB-7KEU-01B and is the answer not in the manual?
Questions and answers