Advertisement
Advertisement
Table of Contents
Summary of Contents for Kaufmann FP10
- Page 1 FOUNTAIN FP10 PUMP KIT Always Read Instruction Manual Retain for Future Reference...
-
Page 2: Warranty
INTRODUCTION Always turn off power or unplug the pump prior Thank you for selecting the Kaufmann fountain to performing any maintenance or placing your pump. Before using this pump please take a hands into the water. moment to review this manual. - Page 3 OPERATION blocking the pump intake. Kaufmann pumps are for use in water only. Detach the power cable from the receptacle or Water temperature should never exceed 95̊ F turn off the power supply (circuit breaker).
- Page 4 Loose debris can be flushed out with clean Note: Make sure the power cord is unplugged water. Often in hard water, well water or pond- before performing any maintenance or cleaning. PARTS LIST 1 MODEL：FP10 1. Back cover 7. O-ring 2. Shell 8. Impeller cover 3.
-
Page 5: Troubleshooting
TROUBLESHOOTING Always turn off power before inspecting the Before ordering repairs, carefully read through pump. Failure to observe this precaution can this instruction manual. If the problem persists, result in a serious accident. contact your dealer. Problem Possible Cause Possible Solution Power is o Turn power on Check power supply or contact... -
Page 6: Technical Specification
TECHNICAL SPECIFICATION Model Number FP10 Operating Voltage 230V/50Hz Power Consumption Maximum Pump Height 1.3m Maximum Flow Delivery 800l/h Cable Length 1.5 m Dimensions 86 x 56 x 72mm Weight 0.42kg... - Page 7 Kaufmann products are exclusively manufactured for and distributed by Agrinet (Pty) Ltd. Private Bag x165, Centurion, 0046 T: +27(0) 12 657 2222 E: enquiries@agrinet.co.za Warranty Information: Kaufmann products have a limited warranty against defects in material and workmanship from the date of purchase.
Need help?
Do you have a question about the FP10 and is the answer not in the manual?
Questions and answers