Subscribe to Our Youtube Channel
Summary of Contents for IDEAL iD110
- Page 1 OPERATION AND ASSEMBLY MANUAL For more information and questions, please contact your local Ideal dealer. IDEAL products are sold through Authorized Retailers.
-
Page 2: Operator Orientation
THANK YOU FOR PURCHASING THIS PRODUCT Congratulations on your purchase of an iD110 Skid Steer Vibrating Head Post Pounder! This implement has been engineered and built as a durable piece of equipment. With regular maintenance, it will provide many years of service. -
Page 3: Table Of Contents
T A B LE O F C O N T EN T S TABLE OF CONTENTS Description Safety Safety Decals Transport Placement Operation Maintenance Storage Maintenance Procedures Parts Troubleshooting Appendix Limited Warranty CUSTOMER INFORMATION Name________________________________________________________________ Purchased From_______________________________________________________ Date Purchased________________________________________________________ Model________________________________________________________________ Serial #______________________________________________________________... - Page 4 SA FE TY Safety is a primary concern in the design and manufacture of our products. Unfortunately, our efforts to provide safe equipment can be wiped out by an operator’s single careless act. In addition to the design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, judgment, and proper training of personnel involved in the operation, transport, maintenance and storage of equipment.
-
Page 5: General Description
S AF ET Y GENERAL DESCRIPTION The Post Pounder is primarily designed and manufactured for the efficient installation of fence posts. Before operating consult your local utility companies to locate buried utilities such as electrical and gas lines. Use only a skid steer loader of adequate power and capacity to operate the equipment. -
Page 6: General Safety
S AF ET Y GENERAL SAFETY rough ground, or near ditches or fences. • Make sure the slow-moving vehicle emblem Important: This general safety section applies to all and all the lights and reflectors required by local operations for the Post Pounder. authorities are in place, are clean, and can be seen Instructions for a specific operations practice (e.g., by all traffic. -
Page 7: Maintenance Safety
S AF ET Y Safety Decals Place all hydraulic controls in neutral and turn off engine before • Keep safety decals clean and legible. disconnecting or working on the WARNING • Replace safety decals that are missing or have hydraulic system. This will relieve become illegible. -
Page 8: Safety And Instructional Decals
SA FE TY SAFETY and INSTRUCTIONAL DECALS ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Replace Immediately if Damaged! - Page 9 S AF ET Y SAFETY and INSTRUCTIONAL DECALS ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED! Replace Immediately if Damaged! Designer: RS WARNING WARNING ELECTROCUTION ELECTROCUTION HAZARD HAZARD This equipment is not insulated. This equipment is not insulated. Please proof carefully. efully.
-
Page 10: Transport
T RA N S P OR TING Transport Follow this procedure when preparing the unit for transport: 1. Shut off all power to the post pounder. 2. Consult with local authorities regarding transport on public roads. Obey all applicable laws and regulations. -
Page 11: Pre-Operation Check List
2. The assistant positions the post under the pounder driven. head with the bottom at the desired post location. Start-up & Break-in Period Although there are no operational restrictions on the equipment when used for the first time, Ideal recommends checking the following mechanical items:... -
Page 12: Shutdown Procedure
O PE RA TI ON 3. The skid steer operator must carefully lower the Although the Post Pounder can pounder to a position that holds the post and be used in all types of weather, the assistant can move to a safe location before the performance of the machine continuing (refer to figure 2.2). -
Page 13: Storage
S T O R AG E 3. After the unit is dry, grease all grease points. Storing the Post Pounder To ensure a long, trouble-free life, use the following procedure when preparing the unit for storage. 1. Store the equipment on a level surface, free of debris, and in an area away from human activity. -
Page 14: Maintenance Procedures
M AI NT EN A NCE PR OCE DU R ES every every every every 1000 pre- every 2 every 8 hours / Maintenance Procedure shift hours hours hours hours hours yearly Verify Correct Operation of all machine functions. Check for leaks, damaged hoses or clamps. Grease the tool, retainer pins and plugs with Chisel past. - Page 15 M A IN T E N A N C E P R O C ED U R E S every every every every 1000 pre- every 2 every 8 hours / Maintenance Procedure shift hours hours hours hours hours yearly Check general condition of machine and surrounding work area.
-
Page 16: Parts
PA RT S iD110 Post Pounder Parts List... - Page 17 FLYING DEBRI (not shown) 9000451 O-RING 9000485 DECAL SAFETY, WARNING 9000452 O-RING HIGH PRESSURE (not shown) 9000453 PISTON BUSH ASSEMBLY 9000486 DECAL IDEAL, 4" X 11.5" (not 9000454 PISTON BUSH shown) 9000455 GAS SEAL 9000487 DECAL LOGO, ID110 (not shown) 9000456 STEP SEAL...
-
Page 18: Troubleshooting
T RO UBL ES H OOT I NG Problem Possible Cause Solution Pressure and return line reversed Connect post driver hoses correctly Gas pressure in head is too high Adjust Gas Pressure Post driver does not work Internal failure of the post driver Contact your dealer Post Driver tool Check that the tool is not broken... - Page 19 B OL T T O RQ U E V AL U ES Proper torque for American fasteners used on manufactured implement. Recommended Torque in Foot Pounds (Newton Meters).* AMERICAN Bolt Head Markings WRENCH BOLT DIAMETER SIZE(IN.)”A” (IN.)”B” AND GRADE 2 GRADE 5 GRADE 8 THREAD SIZE...
-
Page 20: Tightening O-Ring Fittings
O - RI N G F ITTING S TIGHTENING O-RING FITTINGS 1. Inspect O-ring and seat for dirt or obvious defects. 2. On the angle fittings, back the nut off until washer bottoms out at top of groove. 3. Hand-tighten fitting until back up washer or washer face (if straight fitting) bottoms on face and )-ring is seated. -
Page 21: Date Purchased
WARRANTY CLAIM FORM 7 5 0 N . W A L LA C E W I LK IN SON B LV D L IB E RTY , K Y 42 539 PLEASE COMPLETE ALL SECTIONS BEFORE SUBMITTING FOR CLAIM REVIEW. PLEASE INCLUDE PROOF OF PURCHASE AND ANY PICTURES OR ADDITIONAL INFORMATION THAT MAY AID THE CLAIM REVIEW PROCESS. -
Page 22: Warranty Registration Form
I HAVE RECEIVED THE ABOVE EQUIPMENT ALONG WITH THE OPERATOR’S MANUAL, AND I HAVE BEEN THOROUGHLY INSTRUCTED IN THE CARE, ADJUSTMENT, SAFE OPERATION AND APPLICABLE WARRANTY POLICY. OWNER’S SIGNATURES:_________________________________________________ DATE:___________________________ RETURN THIS COMPLETED FORM TO IDEAL FARM EQUIPMENT USING ONE OF THE FOLLOWING METHODS” BY MAIL: IDEAL FARM EQUIPMENT 750 N. - Page 23 N O T ES...
- Page 24 75 0 N. WA L L AC E WILKI NSO N B LVD L I B ERTY, K Y 42 539 1- 888- 40 1- 2003 4000201 REV 1.2...
Need help?
Do you have a question about the iD110 and is the answer not in the manual?
Questions and answers