Advertisement
Quick Links
Congratulations!
Your new ProWash S is the world's most advanced system
for cleaning 3D printed parts. Featuring improvements to
our patented Mechanical Jetting
all-new, cloud-connected onboard computer, your digital
workflow just got a little simpler.
In this guide, you'll find everything you need to get started
using ProWash S.
1
In the Box
ProWash S comes out of the box
with most parts preinstalled.
The hydrometers are precalibrated
for each chamber and will float when
it's time to replace IPA. Read more
about hydrometers in section 4.
Onboarding
Build Platform
Card
Adaptor
(Section 6)
2
Where to Set Up
Set up ProWash S in a well-ventilated area
on a level surface in a
temperature-controlled room. Keep it away
from windows and bright light sources.
Never place anything on ProWash S.
If possible, set ProWash S near your 3D
printer and curing device for optimal
workflow efficiency.
technology and an
TM
ProWash S Device
Metal
Cleaning
Twee-
(Section 9)
Level surface away from light and heat.
Automated Multistage Cleaning System
Designed for Digital Dentistry
Quick Start Guide
Version 1 - Updated on 04/13/2023
Model SRP2210A
Training and Support
ProWash S comes with complimentary
phone and email support. If you have
questions, please get in touch:
Visit
Call
Email
Hydrome-
ters
Preinstalled
Drain
Brush
Hose
Preinstalled
support.sprintray.com
00800 - 70708000
service.eu@sprintray.com
Power Adap-
Basket
(Section 7)
Wash
B
A C
Power
USB
Magnet
Sticker
(Section 6)
Advertisement
Related Manuals for SprintRay SRP2210A
Summary of Contents for SprintRay SRP2210A
- Page 1 Automated Multistage Cleaning System Designed for Digital Dentistry Quick Start Guide Version 1 - Updated on 04/13/2023 Model SRP2210A Congratulations! Training and Support Your new ProWash S is the world’s most advanced system ProWash S comes with complimentary for cleaning 3D printed parts. Featuring improvements to phone and email support.
- Page 2 Pour IPA directly into these tanks. Each tank cleaned and dried. You can wash has a maximum capacity of 2 liters. parts directly on the SprintRay build platform or remove and wash them Tank 1 in the basket. IPA will automatically...
- Page 3 1 Liter 2 Liters Required Per Tank Required Per Tank Build Platform Information Depending on which SprintRay 3D printer you have, you may Printer Model Install Magnet Use Adaptor need to attach a magnet and/or use a fitment adaptor when Pro95 using ProWash S.
- Page 4 How to Wash with ProWash S MAX 10CM Print Platform Wash Basket Wash Remove the basket and place the Pro95/S build platform in the To use the basket, place models inside and close the lid. Use the touchscreen to select a cleaning cycle. wash chamber.
- Page 5 Draining an IPA Tank Retrieve the drain hose from the back of the device, then press the metal tip into the drainage port until it clicks into place Point the end of the hose into a disposal container, then unlock the safety clamp to start the flow Once the tank is empty, eject the drain hose by sliding the outer ring of the drain port away from you How to Dispose of IPA...
-
Page 6: Care For The Environment
Care for the Environment SprintRay ProWash S uses patented technology to improve the efficiency of the washing and drying processes. It’s better for your pocketbook and better for the environment. Here are three easy tips to help you go the extra environmental mile with...
Need help?
Do you have a question about the SRP2210A and is the answer not in the manual?
Questions and answers