Instrument Lighting - BMW Z4 2005 Owner's Manual

High beams/Standing lamps
1 High beams
2 Headlamp flasher
3
Standing lamps
Left or right standing lamps*
As an additional feature, you can illuminate your
vehicle on either side for parking:
1. Turn the ignition key to position 0 or
remove it
2. Turn off the low beams
3. Push the lever in the appropriate turn-signal
direction, until it engages.
The standing lamps discharge the bat-
tery. Avoid using the standing lamps for
longer periods of time; otherwise, you may no
longer be able to start the
Fog lamps*
Tap the button to switch them on or off.
The parking lamps or low-beam head-
lamps must be switched on. A green indi-
cator lamp comes on in the instrument
cluster to indicate that the front fog lamps are on.
Online Edition for Part-No. 01 41 0 158 704 - © 10/04 BMW AG
engine.<
If the automatic headlamp control is on,
the low beams will automatically come on
whenever you activate the front fog

Instrument lighting

Turn the rotary dial to adjust the illumination
intensity.
Interior lamps
The interior lamps operate automatically.
To switch the interior lamps on and off
manually
Press button 1 briefly.
If you would like the interior lamps to remain off
all the time, press and hold the button for
approx. 3 seconds.
Press the button briefly to revert to normal
operation.
Reading lamps*
Switch on and off with button 2 adjacent to
each lamp.
lamps.<
57