Related Manuals for Energer ENB623SDR
Summary of Contents for Energer ENB623SDR
- Page 1 SAFETY AND OPERATING MANUAL Original Instructions 2.0 150W 1/3 SHEET SANDER ENB623SDR...
- Page 2 Read all safety warnings and all instructions before use. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 150W 1/3 SHEET SANDER ENB623SDR...
-
Page 3: General Safety Instructions
4 Use and maintenance of the tool a) Do not force the tool. Use the correct tool for your application. The correct tool will do the work better and safer in the conditions for which it was manufactured. 150W 1/3 SHEET SANDER ENB623SDR... -
Page 4: Special Safety Instructions
(also known as Respirable Crystalline Silica or RCS) during many common tasks such as cutting, drilling and grinding. Breathing in very fine particles of crystalline silica can lead to the development of: Lung cancer 150W 1/3 SHEET SANDER ENB623SDR... - Page 5 Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well-ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. 150W 1/3 SHEET SANDER ENB623SDR...
-
Page 6: Noise Information
Identify safety measures to protect the operator that are based on an estimation of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time). 150W 1/3 SHEET SANDER ENB623SDR... - Page 7 Be sure the supply is the same as the voltage given on the rating plate. Remove the mains plug before carrying out any adjustment or servicing. Intended use The machine is intended for dry sanding of wood, plastic, filler and coated surfaces. 150W 1/3 SHEET SANDER ENB623SDR...
- Page 8 Wear eye protection Wear ear protection Wear respiratory protection Wear safety gloves Double insulation Class Conforms to all relevant safety standards. Warning yyWxx Manufacturing date code: Year of manufacturing (20yy) and week of manufacturing (Wxx); 150W 1/3 SHEET SANDER ENB623SDR...
- Page 9 Components and controls Support handle Main handle Air vents Switch lock button On / off switch Tube adapter Base(self-adhesive) Paper clamp Clamp lever 150W 1/3 SHEET SANDER ENB623SDR...
-
Page 10: Technical Data
Please always check the mains supply voltage before use! It must correspond with the rating label on the appliance. Remove any packing material and loose parts from unit. Check the accessories before use. It should be fit with the machine and your purpose. 150W 1/3 SHEET SANDER ENB623SDR... - Page 11 1. Push tube adapter into the dust collection port which is in rear of the tool, you need to align the pin with the groove. (Fig.3) Fig.3 2.Then turn to the left to lock in place.(Fig.4) 150W 1/3 SHEET SANDER ENB623SDR...
- Page 12 To lock the on/off switch, turn on the on/off switch and press the locking button, release the trigger. The sander will continue to operate until the locking button is released. To release the on/off switch, just press it again and then release it to stop. 150W 1/3 SHEET SANDER ENB623SDR...
-
Page 13: Terms Of Use
Coarse - for removing paint; for sanding of extremely rough wood Medium - for sanding of rough or plain wood Fine - for smoothing of wood; for finishing of bare wood; for smoothing surfaces with old paint 150W 1/3 SHEET SANDER ENB623SDR... -
Page 14: Care And Maintenance
Always keep the machine in dry place. GUARANTEE This ENERGER product carries a guarantee of 12 months. If your product develops a fault within this period, you should, in the first instance contact the retailer where the item was purchased. -
Page 15: Environmental Protection
Directive 2012/19/EU. It will then be recycled or dismantled to minimize impacts on the environment, electrical and electronic products are potentially hazardous to the environment and human health due to the presence of hazardous substances. 150W 1/3 SHEET SANDER ENB623SDR... -
Page 16: Plug Replacement
Note: If a moulded plug is fitted and has to be removed take great care in disposing of the plug and severed cable, it must be destroyed to prevent engaging into a socket. 5 Amp fuse approved To BS1362 150W 1/3 SHEET SANDER ENB623SDR... - Page 17 EN 61000-3-2:2006+A1:2009+A2:2009 EN 61000-3-3:2013 EN 60745-1:2009+A11:2010 EN 60745-2-4:2009+A11:2011 Authorised Signatory and technical file holder Date : 29/01/2015 Signature:_________________ Name / title: Peter Harries / Quality Manager Powersmith (UK) LTD. Trade House , Mead Avenue ,BA22 8RT 150W 1/3 SHEET SANDER ENB623SDR...
Need help?
Do you have a question about the ENB623SDR and is the answer not in the manual?
Questions and answers