BMW SERIE 7 2005 Owner's Manual page 142

Changing scale
Turn the controller to adjust the scale.
The map scale is provided at the lower right
of the Control Display.
{Scale}
1.
2. Enter the desired map scale.
Altering display direction
1. Select "View" and confirm your selec-
tion. All the menu items will disappear
after a few moments if no further entries
are made
2. Select "Map dir. travel" or "Map facing
N." and confirm your selection.
Canceling route map
To change to directional arrow mode:
1. Select "View" and confirm your selec-
tion. All the menu items will disappear
after a few moments if no further entries
are made
2. "Arrow display"
The destination guidance is by means
of arrows on the Control Display and on
the Info Display, refer to page 12.
The arrow will follow the general
course when you travel through an
area for which your navigation CD/DVD
does not provide comprehensive coverage.
This feature is intended to assist you at
crossroads and intersections.<
Displaying route list
You can access a listing of streets and
towns on your route whenever the destina-
tion guidance is active. This list is based on
the navigation system's suggested travel
route.
140
Online Edition for Part-No. 01 41 0 159 154 - © 09/04 BMW AG
The distances remaining to be traveled on
each individual road are also displayed.
1. Select "View" and confirm your selec-
tion. All the menu items will disappear
after a few moments if no further entries
are made
2. Select "Route" and confirm your selec-
tion.
If the system has not yet completely
defined the travel route, "..." will appear
in the list.
Select and confirm to switch off the
route list.
The route list is displayed again after
a short time if no other menu item has
been selected.<
Selecting new route
During destination guidance you can revise
the navigation system's route recommen-
dations to avoid particular stretches of
road. Enter the number of miles/kilometers
that you want to travel before returning to
the original route.
Select "New route" and confirm your selec-
tion.
>
"Avoid sect.":
The route list appears on the Control
Display. Select one or several con-
nected sections of the route that you
wish to avoid and confirm your selec-
tion.
You can correct erroneous entries by
again selecting and confirming the
stretch of the travel route to cancel its
avoid status. You can also replace the
avoid section by marking another