Table of Contents
Advertisement
Indicator and warning
lamps
Technology that monitors itself
The indicator and warning lamps identified
by the
symbol are subjected to an oper-
+
ation check each time you switch on the
ignition or start the engine. They each light
up once for different periods of time.
When a malfunction occurs in a monitored
system, the corresponding lamp will either
fail to go out when the engine is started, or
it will come on again during normal driving,
usually accompanied by a Check Control
message. You will find more details on the
specified pages.
Fixed indicator and warning lamps
Turn signals
Active steering
Brake system
With handbrake engaged
With handbrake released 78,
With other warning lamps
Brake system for Canadian models
Airbags
81
+
Service Engine Soon
If the indicator lamp comes on
either continuously or intermit-
tently, this indicates a malfunction
the emissions-related electronic
systems.
Although the vehicle remains oper-
ational, you should have the sys-
tems checked by your BMW center
at the earliest possible opportunity
Service Engine Soon indicator
lamp for Canadian models
Front fog lamps
60
80
+
+
55
173
78
176
+
86
Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG
ABS Antilock Brake System
DTC Dynamic Traction Control
High beams/headlamp flasher
Please fasten safety belt
DSC Dynamic Stability
Control
78
+
Check Gas Cap
Lamp for US models
Colors
The indicator and warning lamps can light
up in different colors and combinations.
Red:
>
Stop immediately
or
important reminder
Red and yellow:
>
Continue to drive; drive cautiously
Yellow:
>
Have the system checked at the earliest
opportunity
or
for your information
Green or blue:
>
For your information.
Variable indicator and warning lamps
On the display 5 of the instrument cluster,
other indicator and warning lamps appear
as necessary. Pay attention to the instruc-
tions of the accompanying Check Control
messages, also refer to page 66.
78
+
78
86
47
+
162
13
Advertisement
Table of Contents
