Haltech ELITE Series Quick Start Manual page 6

Haltech NSP (Nexus Software Programmer) is the software used
for tuning and programming Elite Series ECUs. Follow these
steps to install the Haltech NSP software:
1. Download the NSP installer - Go to the Haltech website
www.haltech.com), navigate to the 'Downloads' section, and click
on the download link.
2. Run the installer file - Once the download is complete, locate
the downloaded file (usually in the 'Downloads' folder of your
computer) and double-click on the file to run the Nexus Software
Setup Wizard.
3. Launch Haltech NSP - Once the installation is complete, you
can launch the Haltech NSP software from the Windows 'Start'
menu or using the desktop shortcut that was created.
Please note DirectX is required for correct operation of the Nexus
Software Programmer, the installer package will your system and
prompt for installation of DirectX if not already installed. Follow
the prompts to complete.
6