Table of Contents
Advertisement
Changing a wheel
124n
> Spare tire or space-saver spare tire
Located next to the jack.
Loosen the wing nut (arrow) by hand,
remove the storage shelf and take the
wheel out
> Lug wrench – in the onboard tool kit
on the underside of the luggage
compartment lid, refer to page 118.
Procedure
1. Read and comply with the safety
precautions provided on the previous
page
2. Secure the vehicle from rolling:
Place the wedge against the rear
surface of the front tire on the side
opposite the side being raised. If the
vehicle is parked on a downward
slope, place the wedge securely in
front of the tire. If the wheel must be
changed on a surface with a more
severe slope, take additional precau-
tions to secure the vehicle from
rolling
3. Wheels with full wheel covers
Reach into the ventilation openings
and pull the cover off
4. Loosen the lug bolts by rotating half
a turn
5. Position the jack at the jacking point
*
:
closest to the flat tire (arrows) with
the jack base vertically below the
jacking point and the entire surface
of the head of the jack will move into
the square recess of the jacking
point (refer to the detail in the next
illustration) when the jack is cranked
6. Jack the vehicle up until the wheel
you are changing is raised from the
ground
7. Unscrew the lug bolts and remove
the wheel
Online Edition for Part No. 01 41 0 156 144 - © 09/01 BMW AG
Advertisement
Table of Contents
