Core Products CRG109 Manual

CRG109
Thank you for choosing this furniture.
BEFORE YOU START ASSEMBLY please store the carton at room temperature for 48 hours or more so the
contents can acclimatise.
PLEASE RETAIN ALL PACKING UNTIL YOU HAVE COMPLETED ASSEMBLY.
Information about your Pine furniture.
Our pine furniture ranges have been carefully crafted from solid wood and natural wood veneers. Each piece of pine has unique
characteristics such as knots, variances in shading and graining. These are part of the natural character of the furniture itself.
Caring for your Pine furniture.
Extreme temperature can cause slight movements in the wood itself so please avoid placing your furniture close to radiators or other
direct sources of heat. Humidity should also be avoided.
Please avoid exposing your furniture to continued bright sunlight as it can affect the colour.
Any fluid spills should be removed as quickly as possible.
Always lift your furniture when moving as dragging may cause damage to your furniture or flooring.
After care.
Wipe the surfaces with a dry cloth and occasionally apply household furniture polish. Please do not use detergents or chemicals on your furniture.
BEFORE YOU START ASSEMBLY
Please check that you have all the correct parts and fittings as detailed on the
4
5
2
5
2
FOR DAMAGED/REPLACEMENT PARTS
Please visit
www.coreproducts.co.uk/parts
BATCH
2024/0605
NUMBER
PLEASE RETAIN THIS LEAFLET ALONG WITH YOUR DELIVERY
NOTE/ RECEIPT FOR FUTURE REFERENCE
1
3
3
5
2
PARTS LIST
A
35mm
P3
PAINT
x01
RED = PAINT
Warning!
Keep out of reach from children, keep away from eyes, if
product gets into eye rinse thoroughly and repeatedly with
5
water. Do not digest, if swallowed seek medical advise
from doctor.
4
2
RETAIN ALLEN KEY TO TIGHTEN BOLTS WHEN NECESSARY.
assembly instructions.
x26
B
Ø4,0
The RED sachet contains touch up
Allen key
paint for your furniture. Please
retain for use should you require it
at any point in the future. Application
is best with a small paint brush which
can be cleaned in water after use.
Core Products Ltd Perth PH1 3DZ 01/2024
x08
7 x 70mm
x01