Tire Inflation Pressures - BMW SERIE 3 CONVERTIBLE 2002 Owner's Manual

Tire inflation pressures

24n
The specified inflation pressures are
provided on a sticker attached to the
B-pillar and visible with the driver's
door open.
Checking tire pressures
All pressures are specified in the stan-
dard units of pressure for your country,
psi or kilopascal, and apply to cold tires
(tires at ambient temperature, refer to
tire pressure table on the following
page).
Vehicles with Tire Pressure Monitor
(RDC)/Flat Tire Monitor: after correcting
the inflation pressures, reactivate the
system, refer to pages 83, 85.
Another instruction plate regarding
inflation pressures on the door pillar
indicates which system is equipped on
your vehicle.
Check the tire pressures on a
regular basis – at least twice a
month – and before every extended
journey. Otherwise, incorrect tire pres-
sure can lead to poor handling, to tire
damage and accidents.
Remember to check the inflation pres-
sure in the space-saver or standard
spare tire.
Inflate the spare tire to the highest infla-
tion pressure of any tire on your
vehicle.<
Comply with tire approval
specifications
The inflation pressures in the table
apply to BMW approved tire sizes and
tire manufacturers. Your BMW center is
familiar with these pressures. Higher
pressures may be specified for tires
made by other manufacturers.
Your vehicle is equipped with tires that
not only meet US standards, but also
European standards. We recommend
the exclusive use of BMW approved
tires.
Online Edition for Part No. 01 41 0 156 190 - © 09/01 BMW AG