Download Print this page

Aquatop SCUBA-drive Mounting Instructions

Underwater mount with cable duct with wall in concrete or brickwork

Advertisement

Quick Links

C5-1 – Mounting of mechanism: Underwater mount: SCUBA-drive® with
cable duct with wall in concrete or brickwork
General:
The SCUBA-drive® tubular motor is being delivered with a 10m long motor cable,
connected to the motor.
Bring the motor cable outside the swimming pool, through conduit to a connection
box.
This connection box must be accessible at all times, so the motor can be demounted
during maintenance.
It is extremely important to use the supplied polyester resin in the connection box in
order to avoid water damage to motor and/or control box. In case the supplied resin is
not used; warranty will be void.
T&A strongly recommends to use the cable extension set : AT-002738
1. Installation of the flanges
Bolt the flange on the built-in flange, which has already been placed during the
preparations, at the motor side. Don't forget the flat sealing!
See chapter
Drill a 50mm hole. After placing the passage, spray with PUR
to prevent damage to the PVC tube.
MAN-AT-C5-1
"A7 – Constructional preparations: Cable duct for
Manual Aquatop (2018)
SCUBA-drive®"
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the SCUBA-drive and is the answer not in the manual?

Questions and answers

Summary of Contents for Aquatop SCUBA-drive

  • Page 1 C5-1 – Mounting of mechanism: Underwater mount: SCUBA-drive® with cable duct with wall in concrete or brickwork General: The SCUBA-drive® tubular motor is being delivered with a 10m long motor cable, connected to the motor. Bring the motor cable outside the swimming pool, through conduit to a connection box.
  • Page 2 In this way the shaft will not get jammed in case of expansion. Alternatively; a cable gland can be used at this position, as such there is no water in the conduit. Art. no. AT-002883 MAN-AT-C5-1 Manual Aquatop (2018)
  • Page 3 There are 2 ways to stop the water: Pit for cable connection Cable gland screwed into the flange AT-002883 AT-002738 (PREFERED) MAN-AT-C5-1 Manual Aquatop (2018)
  • Page 4 Option: With a liner, there is a risk the liner get damaged in case the cover gets stuck. To protect the liner we propose to install a protection on the wallduct. The protection will be fixated with silicone. Article AT-002763: MAN-AT-C5-1 Manual Aquatop (2018)