Do you have a question about the Snowdonia Monolith and is the answer not in the manual?
Questions and answers
Summary of Contents for Easy Snowdonia Monolith
Page 1
Snowdonia Monolith 44036L User Instructions - Please keep for future reference Technical Information Pump Power supply: 12V - 50Hz Pump Power rating: 17W Pump Ingress protection: IPX8 Dimensions: H797mm x W601mm x D599mm These instructions form part of this appliance. Please be sure to read them before use and keep for future reference.
Page 2
WF_T_1_0_1 Care and safe use guidelines SAFETY INFORMATION • The electrical transformer must always be connected through a portable residual-current device (RCD), or a built- in residual current circuit breaker (RCCB), having a rated residual operating current not exceeding 30mA. (This level of electrical protection was fi...
Page 3
LVP_T_LED_1_0_1 Troubleshooting No Functionality (no water fl ow from the pump and LED’s not working): • Ensure only the pump and LEDs are in contact with water – transformers should not be submerged in water. • Check the plugs are fully inserted and the mains power is switched on. •...
Page 4
Parts List 1. Fountain Top 2. Fountain Base 3. Transformer 4. Pump 5. LEDs (Pre attached) Monolith Prior to assembly, read the instructions carefully. Check all parts against this parts list. Carry out assembly on a soft surface to avoid scratching the product. Please retain this information for future reference. Assembly Instructions Step 1: Feed the cable connection from the pump to Step 2: Connect the water pipe tubing to the pump and...
Need help?
Do you have a question about the Snowdonia Monolith and is the answer not in the manual?
Questions and answers