HiBREW G4 Manual

INTRODUCTION

• Portable body design, easy to carry.
• Easy-to-hold body with various designs.
• Fine grinding, point-to-point adjustment.
• Integral metal body.
• High hardness stainless steel grinding core.

• Knob: solid wood.
• Body: aluminum alloy.
• Handle: aluminum alloy.
• Axis: stainless steel.
• Lid: aluminum alloy.
• Burrs: stainless steel.
• Powder container: glass.

INSTRUCTIONS

Pull out the container. Set up coarseness by turning the scale at the bottom of the body.

Fasten Body with the container. Then open the lid and pour coffee beans inside from the top of the grinder.

Hold the body and rotate the handle.
Pull out the container and pour the ground coffee after grind is finished.

GRINDING REGULATOR

This end is the grinding degree regulator.

• The grinding degree becomes thinner by rotating clockwise, and coarsens by rotating counterclockwise.
• Rotate clockwise to the thinnest limit until the handle can't be rotated, which is the origin point.
• Rotate counterclockwise based on the origin point to adjust the grinding degree.

  The following gears are based on the origin point

  Espresso: 6-12 clicks

  Hand-made coffee: 24 or more clicks

• The above requirements for grinding degree are only estimates and for reference only. Please adjust according to the actual situation.
• To protect the grinding core, please don't grind in the 0-6 gear.
• When adjusting the grinding degree, the handle cover needs to be closed.
• Excessive counterclockwise rotation will lead to damage of grinding core structure.

PRECAUTIONS

• This equipment is only designed for grinding roasted coffee beans Do not grind other items.
• It is recommended to use a brush to clean the product, and do not wash it directly.
• The edge of the grinding core is sharp. Be careful and avoid scratching.
• Do not let children operate this product.
• Please store this product in a dry and cool environment.
• It is not recommended to disassemble and replace the grinding core and other internal parts by yourself. If you have special requirements, please disassemble the product under the guidance of a technician.