Related Manuals for FISIOTECH 1712010
Summary of Contents for FISIOTECH 1712010
- Page 1 Rev.06 02/2024 USE AND MAINTENANCE MANUAL ALUMINIUM ALLOY WALKER WALKER MODELS Description Code Walker 4 stoppers 1712010 Walker 2 castors 2 stoppers 1712020...
- Page 2 Table of contents INTRODUCTION p. 3 SAFETY – WARRANTY – TECHNICAL SPECIFICATIONS p. 4 TRANSPORT/STORAGE/ELIMINATION – USE p. 5 MAINTENANCE – CLEANING p. 6 2 of 6...
- Page 3 WARNING! Thoroughly read the manual before use. FISIOTECH SRL refuses any responsibility and is not liable in case any damage to people and/or goods caused by the improper use of the walker, by negligent or not-qualified staff or by non compliance with these instructions occurs.
- Page 4 Code 1712010 Folding aluminium alloy walker, adjustable in height – four stoppers. Code 1712020 Foldable aluminium alloy walter. Adjustable in height. Two rigid castors, diameter 80 mm - 2 rubber stoppers.
- Page 5 In case of transport operated by a third party, verify whether the goods are properly protected by a solid cardboard box. In case of transport operated by you or during the storage period, verify whether the vehicles and rooms are clean. In case of need, protect with a dust-repellent cloth. This product does not contain components that can be classified special waste.
- Page 6 Check the conditions of the rubber stoppers every 3 months. Check the brakes every 3 months Check the tightening of screws and bolts every 6 months. Check the moving parts every 6 months and grease them if needed. ...
Need help?
Do you have a question about the 1712010 and is the answer not in the manual?
Questions and answers