Subscribe to Our Youtube Channel
Related Manuals for Avidsen Soria
Summary of Contents for Avidsen Soria
- Page 1 OPTION Solar station Produce your own energy Installation instructions Ref. 127135 Installation instructions - Solar station Installation instructions - Solar station - Avidsen - Ref. 127135 - Avidsen - Ref. 127135...
- Page 2 Introduction Thank you for purchasing an Avidsen solar station. Before starting the installation, you must inform your distribution grid operator, Enedis, using the CACSI form (Agreement for self-consumption without injection for an electricity production facility). This form is available on the service-public.fr website and should be submitted to your distribution grid operator ( https://www.service-...
-
Page 3: Kit Contents
Kit contents Installation instructions - Solar station - Avidsen - Ref. 127135... -
Page 4: Equipment Required For Installation
Not included in this kit - For fl oor installation 2 sand bags (15 kg min. per bag) To ballast the brackets of the 2 solar panels and ensure the stability of the installation Installation instructions - Solar station - Avidsen - Ref. 127135... - Page 5 Assembling solar panels Parts to be assembled Handle solar panels with care. Place a piece of cardboard or a blanket Tools needed under the panel before assembling the parts. Installation instructions - Solar station - Avidsen - Ref. 127135...
- Page 6 Assembling solar panels Carefully turn the assembled solar panel over. Assembly of the solar panel is now complete. Installation instructions - Solar station - Avidsen - Ref. 127135...
- Page 7 The inverter is attached to this solar panel. Parts to be assembled Handle solar panels with care. Place a piece of cardboard or a blanket Tools needed under the panel before assembling the parts. Installation instructions - Solar station - Avidsen - Ref. 127135...
- Page 8 Assembling solar panels Carefully turn the assembled solar panel over. Assembly of the solar panel with the inverter plate is now complete. Installation instructions - Solar station - Avidsen - Ref. 127135...
-
Page 9: Installing The Inverter
Installing the inverter Parts to be assembled Tools needed Installation instructions - Solar station - Avidsen - Ref. 127135... -
Page 10: Installation
If you are installing your panels on the ground, go to the next page. If you are mounting your panels on a wall, go straight to Chapter 7 (wall kit optional). Installation instructions - Solar station - Avidsen - Ref. 127135... -
Page 11: Floor Installation
(lawn, terrace, etc.) at the desired fi nal location. The Soria Avidsen solar station should ideally face south, or in any event south-east or south-west. Choose a sunny spot from morning to evening, with no shade, to optimise the performance of the station. - Page 12 Floor installation The Soria solar station must be weighted down using sand bags placed at the read of each structure to ensure its stability. Note: Remove the transparent protective fi lm from the solar panel frames. 15 kg min. 15 kg min.
- Page 13 If you opt for wall mounting, they should be positioned side by side on a wall, in keeping with the installation instructions below. The Soria Avidsen solar station should ideally face south, or in any event south-east or south-west. Choose a sunny wall from morning to evening, with no shade, to optimise the performance of the station.
-
Page 14: Wall Mounting
(optional kit, ref. 127121) Warning: Before you start installing the Soria Avidsen solar station on a wall, make sure you have a minimum width of 2.33 m. If you are installing the panels at a height of more than 1.80 m, you may need to apply to your local council. - Page 15 The upper part of the bracket must be optional positioned in the middle of the solar panel. Ref. 127121 Tools needed Use plugs and screws that are suitable for the bracket. 42 cm 42 cm 32 cm Installation instructions - Solar station - Avidsen - Ref. 127135...
- Page 16 Wall mounting (optional kit, ref. 127121) Level Wall mounting kit optional Ref. 127121 Installation instructions - Solar station - Avidsen - Ref. 127135...
- Page 17 Wall mounting kit Installing the lower part of the wall bracket (locking tab) optional Ref. 127121 Parts to be installed Tools needed Use plugs and screws that are suitable for the bracket. Installation instructions - Solar station - Avidsen - Ref. 127135...
- Page 18 Warning: the two junction boxes at the rear of each panel must be side by side to facilitate wiring. Installation of your solar station on the wall is now complete. Go to Chapter 8 to make the connections. Installation instructions - Solar station - Avidsen - Ref. 127135...
- Page 19 16 amp mechanism). If necessary, add a waterproof outdoor extension cord. Inverter Push in and screw. 230 V socket Place the solar panel fi tted with the inverter here Installation instructions - Solar station - Avidsen - Ref. 127135...
- Page 20 The inverter panels and Flashing is operating the mains. abnormally Contact the after-sales service Check the status department No WiFi of the inverter in Yellow connection the app (settings/ advanced settings) Installation instructions - Solar station - Avidsen - Ref. 127135...
- Page 21 Once the solar station is connected, follow the the application guide you. instructions below to pair it. 1 - Installing the mobile app Download the Avidsen Home app from the If you do not connect Android Play Store or Apple App Store. your solar station to the Internet, you won’t...
-
Page 22: Installing The Mobile App
Not compatible with 5 GHz WiFi or with WEP encryption. Please check the WiFi settings of your router or contact your Internet service provider if you experience connection diffi culties. Note: Installation instructions - Solar station - Avidsen - Ref. 127135... - Page 23 Stay within 5 m of your solar station during the Bluetooth pairing phase. To make pairing easier, this is done via Bluetooth. The product will appear directly on screen, press Ajouter (Add). Installation instructions - Solar station - Avidsen - Ref. 127135...
- Page 24 Your solar kit is now operational and will appear place. This step can take several minutes. in your app. Your Soria Avidsen solar station has been successfully paired, you can rename your Soria solar station by pressing the pencil and pressing Terminé...
- Page 25 Power generated the day during the month Power generated Total power during the week Device information Home page Setting the currency and unit price of electricity. Viewing faults. Production monitoring chart Installation instructions - Solar station - Avidsen - Ref. 127135...
-
Page 26: Technical Features
General inverter characteristics Operating temperature -20°C to +50°C Storage temperature -20°C to +50°C Dimensions 190 × 254 × 35 mm Weight 1.4 kg Watertightness IP65 WiFi 2.4 GHz Installation instructions - Solar station - Avidsen - Ref. 127135... -
Page 27: Warranty
Monday to Friday, 9am to 12pm, and 2pm to 6pm. The solar panels of the Soria Avidsen station should be cleaned once a year using clean water and a soft non- Avidsen undertakes to keep a stock of spare parts for this abrasive sponge where appropriate. - Page 28 Union harmonisation legislation and its conformity EU Directive and delegated directive 2015/867/EU. has been assessed pursuant to the applicable standards in force: Signed by Alexandre Chaverot, CEO, on behalf of Avidsen Inverter: 19 avenue Marcel Dassault, 37200 Tours, France - Specifi c inverter regulations...
- Page 29 19 avenue Marcel Dassault - ZAC des Deux Lions 37200 Tours - France Installation instructions - Solar station Installation instructions - Solar station - Avidsen - Ref. 127135 - Avidsen - Ref. 127135...
Need help?
Do you have a question about the Soria and is the answer not in the manual?
Questions and answers