Do not use candles, matches, or any open flames in or near the swing. III. Maintenance This user manual is for 3-seat swing chair, 6055-4090. MCombo reserves the right to change, Wash frame parts and fabric with mild soap and water, rinse thoroughly.
Assembly Steps Preparation Please remove all protective foam.Before assembling, make sure that you lay out and identify all parts listed below in the parts list. Install on level ground. Tips: For a smooth installation, keep the parts horizontal during the installation of the screws. Connect #E(Connecting Bar) to #A(Front Leg) and #B(Back Leg) with four #R(8*65mm Screw).
Page 5
Connect #F(Left Back Support) to #F1(Right Back Support). Connect #G(Left Bottom Attach #I(Left Arm Frame) and #I1(Right Arm Frame) to #J (Seat Frame with the cloth) using Support) to #G1(Right Bottom Support) with three #W(6*32mm Bolt Set). Connect the ends four sets of #T(8*72mm Bolt Set).
Page 6
Attach #K(Canopy Frame (Right&Left)) to #C(Left Top Bar) and #D(Right Top Bar) using #X(Knob). Connect #K(Canopy Frame (Right&Left)) to #L(Lower Canopy Frame). Do not tighten the #X(Knob) first before the installation is complete. Tip: Insert #L (Lower Canopy Frame) into #M(Canopy). Put #N(Cushion) on the seat .
Conditions, malfunctions, or damage not resulting from defects in material or workmanship To obtain warranty service, you can contact us via email sales@mcombo.com.Contact us to determine the issue and the appropriate solution for you. Before this, you can take some photos of your product and send them to us, so that we can reply to you more quickly and accurately.
Need help?
Do you have a question about the 6055-4090 and is the answer not in the manual?
Questions and answers