KENT 111159 Instruction Handbook For Installation, Operation And Maintenance

Water softener 100 l

Advertisement

Quick Links

Marketed by:
KENT RO SYSTEMS LTD.
E-6, 7 & 8, Sector-59, Noida, U.P.-201 309, India.
E-mail: sales @ kent.co.in | Website: www.kent.co.in
Manufactured by:
KENT RO SYSTEMS LTD.
1) A-6, Sector-87, Noida, U.P.-201 305, U.P. India.
2) Plot No. 3, Sector-155, Noida, Greater Noida,
Gautam Buddha Nagar, Uttar Pradesh 201310, India
For customer complaints, contact our Customer Care O cer at:
E-6, 7 & 8, Sector-59, Noida, U.P.-201 309, India. Call: 92-789-12345
E-mail: service @ kent.co.in or visit us at www.kent.co.in
KE
KENT Automatic
W
Water Softener 100 L
Instruction Handbook
Instruction Handbook
for Installation, Operation
for Installation, Operation
for Installation, Operation
and Maintenance.
and Maintenance.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 111159 and is the answer not in the manual?

Questions and answers

Summary of Contents for KENT 111159

  • Page 1 2) Plot No. 3, Sector-155, Noida, Greater Noida, Gautam Buddha Nagar, Uttar Pradesh 201310, India For customer complaints, contact our Customer Care O cer at: E-6, 7 & 8, Sector-59, Noida, U.P.-201 309, India. Call: 92-789-12345 E-mail: service @ kent.co.in or visit us at www.kent.co.in...
  • Page 2: Table Of Contents

    Introduction Welcome to the world of KENT, leaders of water purification Salient Features industry in India. With a KENT’s product you have all reasons to Items in the box smile, since at KENT, we take pride in the quality and laboratory-tested performance of our products.
  • Page 3: Introduction

    The KENT Automatic Water Softener 100 L would provide you and your family with advantages outlined below. Regeneration of the System...
  • Page 4: Important Instructions

    KENT Automatic Water Softener 100 L is set to soften your water again. • The input water pressure must be between 20 to 150 psi, no negative water pressure is allowed.
  • Page 5: Included In The Box

    Unpacking Before Installation To install the softener many parts are provided in the packaging. In all cases where metal pipe was originally used and is later interrupted by poly pipe, or the Noryl bypass valve, an approved ground clamp with physical separation and Included in the box: no less than #6 copper conductor must be used for continuity, to maintain proper metallic pipe bonding.
  • Page 6: Preparations

    Preparations Preparations (Continued) Media Installation (When Necessary) Follow the steps below for proper media loading.
  • Page 7: Brine Tank Assembly

    Preparations (Continued) Planning Your Installation Brine Tank Assembly Water Softener Installation Layout To assemble the brine tank, (some tanks may Select the location for your softener tank with care. be square) follow these steps: Various conditions that contribute to proper location include: 1.
  • Page 8: Installation Steps

    Planning Your Installation (Continued) Installation Steps Water Softener Installation Upflow To Begin Your Installation: 1. Make sure the bypass is attached securely to the control valve. 2. Apply thread tape to threaded connections straight or elbow plumbing adaptors 3. Apply the supplied lubricant to the O-rings of the fittings. 4.
  • Page 9: Troubleshooting Guide

    Troubleshooting Guide 7. Attach the brine line from brine tank to brine line fitting on control valve. install the tube stiffener into the end of the brine line before attaching it to the brine line fitting on the control valve See Fig. 2. 8.
  • Page 10 Troubleshooting Guide (Continued) 100 L 111159...

Table of Contents