Contents Installing the AI NVR 2 Premium+ Analytics Kit Recommended Tools Opening the Cover Installing the Analytics Kit in Slot 4 of Expansion Riser Reattaching the Cover Confirming the Installation For More Information...
Installing the AI NVR 2 Premium+ Analytics Kit NOTE If the AI NVR 2 Premium Plus Form H is an operating part of your security system, be aware that it must be shut down to complete this procedure. Before starting to install the kit: 1.
Opening the Cover 1. Remove the complete access panel. a. If necessary, unlock the access panel latch. b. Press the release button. c. Pull up the latch to disengage the access panel from the chassis. d. Slide the access panel toward the rear of the server and lift it from the chassis. NOTE Turn the access panel over to locate the server access panel label.
5. Install the Analytic Kit in slot 4 of the expansion riser. a. Remove the GPU blank from slot 4 using a T-10 screwdriver. b. Slide the card into the slot guide opposite the connector to align the connector on the card with the connector on the riser.
Confirming the Installation Verify the upgrade is successful: 1. Log in to the ACC Client on a workstation on the same network as the AI NVR 2 Premium Plus Form H. 2. In the System Explorer, click Site Setup, and click Site to expand the site containing the upgraded AI NVR 2 Premium Plus Form H.
For More Information For additional product documentation and software and firmware upgrades, visit support.avigilon.com. Technical Support Contact Avigilon Technical Support at support.avigilon.com/s/contactsupport. For More Information...
Need help?
Do you have a question about the AVIGILON AINVR2-PRM-PLUS-FORM-H-ANK and is the answer not in the manual?
Questions and answers