Table of Contents
Advertisement
Tyre pressure close to limit
3
of permitted tolerance
General warning light shows
34
yellow.
Warning-triangle symbol
appears on the display.
The critical tyre pressure flashes.
Measured tyre pressure is close
to the limit of permitted toler-
ance.
Correct the tyre pressure as
stated on the inside cover of
the Rider's Manual.
The tyre-pressures listed
z
on the inside cover are
temperature-compensated; the
reference tyre temperature for
these readings is always 20 °C.
The procedure for correctly tyre
pressures when the tyres are not
at this reference temperature is
as follows:
Calculate the difference between
the specified value stated in the
Rider's Manual and the reading
shown by the RDC system. Use
the public air line at a petrol sta-
tion or motorway service area to
adjust the tyre pressure by this
amount.
Tyre pressure outside
permitted tolerance
General warning light
flashes red.
Warning-triangle symbol
appears on the display.
The critical tyre pressure flashes.
Measured tyre pressure is out-
side permitted tolerance.
Check the tyre for damage and
to ascertain whether the mo-
torcycle can be ridden with the
tyre in its present condition.
If the motorcycle can be ridden
with the tyre in its present condi-
tion:
Incorrect tyre pressures im-
pair the motorcycle's hand-
ling characteristics.
If tyre pressure is incorrect it is
essential to adapt your style of
riding accordingly.
Correct the tyre pressure at the
earliest possible opportunity.
Have the tyre checked for
damage by a specialist
workshop, preferably an
authorised BMW Motorrad
dealer.
If you are unsure whether the
motorcycle can be ridden with
the tyre in its present condition:
Do not continue your journey.
Notify the breakdown service.
Have the tyre checked for
damage by a specialist
workshop, preferably an
authorised BMW Motorrad
dealer.
Signal transmission
disrupted
"
" or "
" appears on
--
-- --
the display.
Advertisement
Table of Contents
