Ambit CIP 270 User Manual

Alphanumeric Keypad
LED
POWER INDICATOR
Steady green when powering on, blinking red when
there are new messages.
LINE KEYS
Steady Green: During the conversation, or plan to
dial a call.
Blinking Red: The call is ringing.
Off: Idle interface.
Place a Call
THREE WAYS TO MAKE A CALL
Handset: Pick up the handset; enter the number,
then press the "Send" soft key or press #.
Speaker: Press or the line keys; enter the
number, then press the "Send" soft key or press #.
Headset: Press ; enter the number, then press
the "Send" soft key or press #.
Note: You may also use Contacts or call log to dial
the number you want. Press the dial key and place
the call by the three ways mentioned. You may
also alternate the mode during the call.
CIP 270 USER GUIDE
Soft Keys
Conference
Hold
Transfer
Redial
Volume Keys
Answer a Call
THREE WAYS TO ANSWER A CALL
Handset: Pick up the handset.
Speaker: Press
Headset: Press
Note: You may also reject the call by pressing the
"Reject" soft key.
Call Transfer
THREE WAYS TO ANSWER A CALL
Blind Transfer:
1. Press
the conversation, the call is on hold now.
2. Input the number you wish to transfer to.
3. Press
now the blind Transfer is complete.
Attended Transfer:
1. Press
the conversation, the call is on hold now.
2. Enter the number you wish to transfer to and
press the "Send" soft key or #.
3. Start the second conversation, press
"Transfer" soft key. Transfer completed.
Semi-Attended Transfer:
1. Press
the conversation, the call is on hold now.
2. Enter the number you wish to transfer to and
then press #, then you can hear the ringtone.
3. Press
the Semi-attended Transfer is complete.
.
.
or the "Transfer" soft key during
or the "B Transfer" soft key and
or the "Transfer" soft key during
or
or the "Transfer" soft key during
or the "Transfer" soft key and now
Line Keys
Message Notification
Navigation Keys
Messages
Headset
Mute
Speaker
End a Call
THREE WAYS TO END A CALL
Handset: Hang up the handset or press the
"Cancel" soft key.
Speaker: Press , when speaker mode is active
or press the "Cancel" soft key.
Headset: Press the "Cancel" soft key.
Call Conference
ADDING MEMBERS TO A CONFERENCE CALL
Assuming that "A" and "B" are in conversation. "A"
wants to bring "C" (or "D" & "E") in a conference:
1. "A" press "Hold", the call is placed on hold.
2. "A" press "New Call", enter the number of "C"
and then press the "Send" soft key. "C" answers
the call.
3. "A" press or the "Conference" soft key, then
"A", "B" and "C" are now in a conference.
4. If add "D" & "E", "A" press "Hold", the current
conference is on hold, press "New Call" and dial
"D", "D" answer the call. "A" Press "Hold" and
"New Call" and dial "E", "E" answer the call. "A"
press "Hold" and "New Call" and dial "E", "E"
answers the call. "A" press
"C", "D" and "E" are in a conference.
Note: (1) If "C" does not answer the call, "A" can
go back to continue to the conversation with "B".
(2) Once "A" hangs up the call, the conference
ends, while if "B" or "C" drops the call, "A" & "C"
or "A" & "B" conversation continues.
, then "A", "B",