Download Print this page

Red Arrow HLBMS-RC Installation Instructions

Remote control for high bay microwave sensor

Advertisement

Quick Links

Safety Warning
The installation should be carried out
by a qualified electrician in compliance
with the current edition of the IEE
Wiring Regulations.
Prior to installation, carry out the
necessary risk assessment considering
the people who could be at risk,
the level of risk and the precautions
required to control the risk
Ensure that the circuit supply is
isolated either by the circuit supply
fuse being removed or the applicable
Specification
Box Contents -
1 x Remote control for High Bay Microwave Sensor
Dimensions:
L: 116 x W: 53 x D:59mm
Material:
Polycarbonate
Battery Type:
2 x AAA
Guarantee:
5 Years
5
YRS
GUARANTEE
Remote Control Settings
Press the 'ON/OFF' button, the light goes to constant on or constant off, the sensor is disabled. Press the 'Rest' or Auto Mode' button to quit from this
mode.
ON/OFF
Press the 'Rest' button, all parameters are the same as the setting of the DIP switch
Reset
Press the 'Auto Mode' button, the sensor starts to work and all parameters settings will remain the same as the previous status before the light was
Auto
switched on/off.
Mode
Press the 'DIM Test' button to test the dimming function. The sensor will dim automatically and return to normal work mode.
DIM
Test
The button ' Test (2s)' is for factory testing purpose only. The sensor will go to test mode,
Test
Detection sensitivity: 100%
(2s)
Hold time: 2sec
Stand – by dim level: 10%
Stand – by period: 0s
Daylight sensor: Disable
To quit the test mode press any button
INSTALLATION INSTRUCTIONS
Remote Control For High Bay Microwave Sensor
Product Codes: HLBMS-RC
circuit breaker being turned off before
installation or any maintenance.
Check the total load on the circuit
ensuring the luminaire does not exceed
the rating of the circuit cable, fuse or
circuit breaker.
Long-term use and voltage fluctuations
can reduce the life span of the fitting.
If the fitting incorporates control gear,
ensure careful sizing to avoid instances
of nuisance tripping of the protective
device used in the installation.
Follow the provided installation
instructions, using the fixings supplied
or recommended.
Keep out of reach of children.
W53mm
D12mm

Advertisement

loading
Need help?

Need help?

Do you have a question about the HLBMS-RC and is the answer not in the manual?

Questions and answers

Summary of Contents for Red Arrow HLBMS-RC

  • Page 1 INSTALLATION INSTRUCTIONS Remote Control For High Bay Microwave Sensor Product Codes: HLBMS-RC Safety Warning • • The installation should be carried out circuit breaker being turned off before Follow the provided installation by a qualified electrician in compliance installation or any maintenance.
  • Page 2 When this fitting comes to the end of it’s life or you choose to replace it, please do not dispose of it with your normal waste. Please recycle where the facilities exist, check with your local authority for suitable options. INS/ACCESSORIES/0004/HLBMS-RC/V1 Red Arrow Electrical Ltd T: 0800 195 0006 redarrowelectrical.co.uk Cortonwood Drive, Brampton, sales@redarrowelectrical.co.uk...

This manual is also suitable for:

Hlbms