HOOKER FURNISHINGS Beau CC612-PFSW-082 Assembly Instruction

Thank you for purchasing this quality product. Be sure to unpack carefully looking for small parts which may have come loose
during shipment. Read all instruction and study the drawing carefully before starting the assembly process.
CAUTION: Make sure to read the instructions below before assembling your swivel recliner. We suggest two people
be used in the assembly of your swivel recliner.
A×1
Step 1
Locate the power transformer attached to Mechanism post. Remove it and set it aside to be used later.
Step 2
Set up the back cushion(B) on the seat , and zip up the seat cushion and back cushion.
Step 3
Attach the power cord to the outlet found at the bottom rear of the recliner.Plug the transformer into a
nearby outlet, still making sure it is clear of the metal base.
Do Not plug the power cord into a power outlet until your recliner is fully assembled and in place.
Notes:
1) To help prevent shock and or damage to your product only plug the power cord into a grounded outlet.
2) Read the operating instructions carefully before operating your lift chair.
IMPORTANT NOTE
· To avoid any risk of suffocation to children or pets, dispose of all plastic bags immediately.
· To ensure proper performance, occasionally check for loose screws and tighten as needed.
ASSEMBLY INSTRUCTION
ITEM: CC612-PFSW-082 Beau Swivel w/PWR Footrest
CC610-PFSW-040 Bonnie Swivel w/PWR Footrest
UNZIP
B
B×1
C×1
ZIP
C
Page 1 of 2