Related Manuals for senelux PHG-2000AR
Summary of Contents for senelux PHG-2000AR
- Page 1 INSTRUCTION MANUAL Electric Patio Heater with Tripod WITH REMOTE CONTROL Model: PHG-2000AR ENGLISH...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Attentions For Safe Use Instructions For Assembly iii. Product Operation Instructions Maintenance Common Trouble Shooting Technical Parameters vii. Items Included In The Package viii. Warranty Information... -
Page 4: Attentions For Safe Use
DEAR USERS Thank you for choosing this product. For your convenience, please read this manual carefully, follow the instructions strictly, and store it in a safe place. If any problems arise during use, you can contact us via our after-sales service hotline. To ensure safe use, please check if the product is in good condition and that all accessories are complete after opening the package. - Page 5 Warning: do not cover the heater to avoid overheating. It is not used to dry clothes. Keep children and pets at a safe distance from equipment. Children aged 8 and above and those with reduced physical, sensory or mental abilities or lacking experience and knowledge may use the equipment, provided that they have received supervision or guidance on safe use of the equipment and are aware of the risks involved.
- Page 6 Always ensure that the heater is plugged into a suitable socket that has been tested for outdoor use. To disconnect the heater, please turn off the controller and unplug from the socket. Do not unplug by pulling the power cord. To disconnect the heater, please turn off the controller and unplug from the socket.
-
Page 7: Instructions For Assembly
2. INSTRUCTIONS FOR ASSEMBLY Attached the brackets to the back of the heater with four M5*10 screws supplied. Remove the nut and screw from the upper pipe of the tripod. Assemble the heater with the installed bracket onto the tripod pipe as shown in the diagram, adjust the angle of the heater, and tighten the screw and nut. - Page 8 On/Off Operations Plug the power cord into the socket and press the main switch at the back of the heater. The blue indicator lights of the touch buttons will illuminate, indicating the heater is in standby mode. Touch the On/Off button once.
-
Page 9: Maintenance
Remote Control Operations In standby mode, press the red button, and the display will show “P0”. Press the Power Up button increase the heater’s power. Press the Power Down button decrease the heater’s power. Press the P1 button to activate half power operation. -
Page 10: Common Trouble Shooting
Insufficient time Wait for several minutes for pre-heating after turning on the power 6. TECHNICAL PARAMETERS PHG-2000AR Model 220-240V(50Hz) Rated Voltage 2000W Rated Power 2.8Kg Heater Net Weight... -
Page 11: Items Included In The Package
Instruction manual x 1 Metal brackets x 4 8. WARRANTY All Senelux products are covered from the original purchase date by a standard 2-year warranty. To register your warranty, please visit www.senelux.co.uk. If, in the unlikely event that your product has any manufacturing defect, please get in touch with our customer service team at support@senelux.co.uk. - Page 12 Senelux U.K. Limited Unit 9 Wareing Road Liverpool, L9 7AU United Kingdom Email - info@senelux.co.uk Website - www.senelux.co.uk Be sure to tag us in your photos on social media using #seneluxathome to be featured @Senelux @senelux.official Thank you very much for using our products.
Need help?
Do you have a question about the PHG-2000AR and is the answer not in the manual?
Questions and answers