Do you have a question about the Smart 2 FIX and is the answer not in the manual?
Questions and answers
Summary of Contents for Kaptia Smart 2 FIX
Page 1
Smart 2 250 / 500 / 1000 version 020A Quick user guide 09/2024 Page 1...
Page 2
Introduction Smart 2 receivers are superheterodyne receivers with a frequency of 433.920 MHz. They can be used to control access to community garages and private homes. There are 2 versions of this device: - FIX model - KODE model The FIX model (unmanaged operation) allows the use of HCS* type controls. To do this, they will be registered following the procedure described on page 3.
Page 3
Operation (FIX version) REMOTE CONTROL REGISTRATION: (1): Press the button until the receiver beeps and the status LED status lights up. (2): Press the button on the remote control to register until the receiver emits a long beep. If the receiver emits 1 short beep, it means that the transmitter is stored in memory.
Page 4
Technical characteristics Power: 12/24V AC/DC Consumption: <100mA Interface: USB 2.0 Frequency: 433.920 MHz Modulation: OOK Supported system: Key (KODE version) Updatable: No Warning The manufacturer is not responsible for any damage caused as a result of inappropriate or improper use of the device. This device complies with the essential requirements set by Directive 99/05/EC.
Need help?
Do you have a question about the Smart 2 FIX and is the answer not in the manual?
Questions and answers