Quest Engineering WIREFREE LITE Manual

IN THE BOX
One Lite headphones
One WTX Transmitter
Two USB 2.0 charger cables
One USB to 6.35|1/4" audio cable
Two elastic bands, two velcro pads, one soft carry case
EU Declaration of Conformity
Hereby, Dongguan Quest Detection Technology Co., Limited
declares that this radio equipment is in compliance with
directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following address:
www.detectorportal.eu/compliance
Congratulations on your purchase of this Wire-
Free headphone kit. Before using your headphones
for the first time, please take a moment to
carefully read the following information.
IMPORTANT - PLEASE READ
Fully recharge the batteries before using.
Do not expose the devices under direct sunshine.
Do not immerse the devices in any liquid.
SERVICE EUROPE
Quest Europe GmbH
Bunde-West 15 - 26831 Bunde - Germany -
info@idc-detektor.de - +49 (0)49537082810
WIREFREE
SAFETY INSTRUCTIONS
• When wearing the headphones, make sure the volume is
turned to minimum. Only adjust the volume after putting
the headphones on. Do not turn the volume up too loud.
You could cause permanent damage to your hearing.
• Danger to life! Headphones dramatically reduce your
ability to hear ambient noise. Using headphones while in
road traffic is potentially very dangerous and is therefore
prohibited by law. Also, please make sure that you do
not use your headphones when in the vicinity of possibly
dangerous machines and tools.
• This product's wireless 2.4G technology has a transmission
range of approx. 10 meters, but interfering obstacles (people,
metal objects, walls, etc.), other radio siqnals, and other
factors may affect the transmission ranqe or even lead to the
loss of the connection.
WIRE
FREE
LITE
MANUAL