Advertisement
Quick Links
EN
CA05
Clock with projection and weather
station
Thank you for purchasing our equipment. Please read this manual carefully and heed the safety warnings and
instructions before installing, using or repairing the equipment. This will ensure not only the protection of persons, but
also the long life of the equipment.
D ES C R IP T IO N O F EQ U IP M EN T
A.
Button to adjust the radio volume
C.
Day of the week
E.
Temperature
G.
Alarm indicator 1
I.
FM radio indicator
K.
Auto brightness function indicator
M. Battery compartment cover
O.
UP button
Q.
DOWN button
S.
-/
button
U.
SET button
W. USB charging interface (MAX. 5V1A)
SNOOZE/LIGHT button
Y.
B A S IC IN FO R M A T IO N
-
FM radio (frequency band 87.5~108MHz)
-
FM radio can be switched on in sleep mode
-
Day of the week display
-
Time format in selectable 12/24 HR mode
-
Temperature and relative humidity
-
Weather forecast function
-
The brightness of the LED display can be adjusted in 3 stages or switched off
-
Dual alarms that can be set for weekdays/weekends and daytime wake-up calls
-
Alarm tone can be set as FM radio
-
8 minute snooze function
-
Time and temperature display function
-
Display projection function with 180 degree rotation
-
Temperature unit in selectable °C / °F
-
Temperature measurement ranges: -9°C ~ +50°C
-
Humidity measurement ranges: 20-95%
-
Power: Battery / Adapter DC5V1,2A
FIR S T S T A R T
1.
Open the battery compartment cover, insert the CR2032 battery and observe the polarity (+ | -), if there is an
insulating foil on the battery, remove it.
2. Insert the power connector into the socket on the back of the product, then plug the adapter into an electrical outlet
(240 V). The display lights up and stays on
3. If the power adapter is disconnected, the display will go off. CR2032 battery power is used for time keeping only.
B.
Weather forecast pattern
D.
Time
F.
Projection window
H.
Alarm indicator 2
J.
Sleep mode indicator
L.
Humidity
N.
PROJECTION button
P.
FM button
R.
+/°C/°F button
T.
Alarm button
V.
Power input connector
X.
Light sensor
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for Solight CA05
- Page 1 CA05 Clock with projection and weather station Thank you for purchasing our equipment. Please read this manual carefully and heed the safety warnings and instructions before installing, using or repairing the equipment. This will ensure not only the protection of persons, but also the long life of the equipment.
- Page 2 T IM E S E T T IN G Press the button to select the time display format 12/24 hrs. To set the exact time, press and hold the button (for about 2 seconds) until the HOURS starts flashing. U se th e + /- buttons to set the desired hour. Press the button again to confirm the setting and move on to the next setting.
- Page 3 In Auto Brightness Adjustment mode, you cannot adjust the brightness level manually. The product has been issued with a CE declaration of conformity in accordance with the applicable regulations. On request from the manufacturer: info@solight.cz, or downloadable at www.solight.cz/en. Solight Holding, s.r.o., Na Brně 1972, Hradec Králové 500 06, Czech Republic.
Need help?
Do you have a question about the CA05 and is the answer not in the manual?
Questions and answers