Advertisement
Quick Links
Advertisement
Related Manuals for STL ICON A-IS100
Summary of Contents for STL ICON A-IS100
- Page 1 ICON ® SPEAKER A-IS100 A-IB100 INSTRUCTION MANUAL SpeedTech Lights, Inc © 2019...
- Page 2 This document must be delivered to and read by the end user and installer as it serves to provide you with the required information for proper and safe use of your STL product. Before operating this or any STL products the user and installer must read this manual all the way through. You will find important information in this manual that could prevent property damage and/or serious injury to the user and installer.
- Page 3 Grommets, cable ties, looms, and other installation hardware should be used to anchor and protect all wiring. Fuses should be properly sized and located as close to the power take off points as possible to protect the wiring and device. To protect against short circuits, a fuse is included by STL for all products.
- Page 4 ICON ® SPEAKER Wiring Diagram Wire Color Function Siren Input 1 White Siren Input 2 Black NOTE: Speaker wires have no polarity. Specifications Ohms 11 Ω Decibels 120 dB Cable Length .6’ Extension Cable (Sold Separately) • If you are extending the main cables, just add the desired length of cable to the end of the main cables coming out of the unit.
Need help?
Do you have a question about the ICON A-IS100 and is the answer not in the manual?
Questions and answers