MAYTONI DRC034-B Operation Manual

Operation
Manual
Remote control for Maytoni lamps
of Exility collection
Present
illuminated
+Present in light
Technical
characteristics
Operating rules
Equipment:
Remote Control
User's manual
AAAx2 battery
Description and purpose of the device
This device is designed for remote control of lamps connected to the Maytoni magnetic track of
the Exility collection. The device allows you to turn on / off, adjust the brightness, color
temperature, run pre-installed scenarios, control lamps in groups. It is possible to divide the
existing lamps into 4 groups. Control is made via Bluetooth. Customization of all available
functions can be possible via the Maytoni Smart app.
Model
Supply voltage
Maximum number of lamps
in 1 group
Number of connected groups
The principle of communication with devices
Operating range Remote control
Transmitter radiation power
Remote control battery
Degree of protection against moisture and dust
Operating temperature
Housing material
Color
Overall dimensions (LxWxH)
+ Remove the remote control from the package, carry out a visual inspection: the product
should not have visual defects and other damage. Check that you have all the required equipment.
+ Before use, it is necessary to install the lamps on a de-energized busbar. Download the
Maytoni Smart app for your platform via Google Play or the App Store, register an account with it
and add existing fixtures through its interface (see lighting manual).
+ Insert the batteries into the remote control. To do this, slide the battery cover down and
remove it on the back of the device, then place the batteries in it, following the polarity. Place the
cover back.
+ Use the Maytoni Smart app interface to link your remote control to your track lighting
system. Hold down the On and Off buttons at the same time until the operation indicator starts
flashing. After that, start the process of pairing the device with the system in the application in
automatic mode.
+ After completing the pairing process, group your existing luminaires using the application
interface. Then it becomes available to control the track system using the remote control.
The device of the remote control
and the purpose of the buttons
DRC034-B
3
50
4
Bluetooth
10m
10mW
2xAAA
IP20
0° ...+60°
Soft-touch ABS
Black
150*37*15mm
Trip indicator
Off button
Power button
Color temperature
control buttons
Brightness buttons
Button for launching
preset scenarios
Lamp group selection
buttons
Battery compartment
maytoni.de
Attention!
+ Replace used batteries in a timely
manner.
+ It is not recommended to use the
product with a damaged case.
+ The device is intended for indoor use
only.
+ It is forbidden to use the product in
rooms with high humidity and with a high
content of dust or aerosol particles in the air.
Learn more
about the
Technical
collections