Magnum MI-11050 Operating Instructions Manual

1-hp wall mount dust collector

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

MODEL NO.: MI-11050

OPERATING MANUAL

Table of Contents

Need help?

Do you have a question about the MI-11050 and is the answer not in the manual?

Questions and answers

Summary of Contents for Magnum MI-11050

Page 1 MODEL NO.: MI-11050 OPERATING MANUAL...
Page 2: Table Of Contents
TABLE OF CONTENTS General Safety Instructions MI-11050 Specific Safety Instructions Features Physical Features Proper Grounding Unpacking & Inventory Assembly Test Run Operation Maintenance Lubrication Impeller Machine Storage Emptying Collection Bag Parts Diagram Parts List...
Page 3: General Safety Instructions
GENERAL SAFETY INSTRUCTIONS Extreme caution should be used when operating all power tools. Know your power tool, be familiar with its operation, read through the owner's manual and practice safe usage procedures at all times. CONNECT your machine only to the matched and DISCONNECT the power source when changing specific power source.
Page 4: Mi-11050 Specific Safety Instructions
Road and understand the instruction manual before operating dust college, Basic precautions listed below should always followed when using your dust collector to reduce the risk of injury, electrical shock or fire. The MI-11050 is designed to collect sawdust only. Never operate the dust collector with all blast gates closed.
Page 5 By following the instructions and procedures laid out in this owner’s manual you will receive years of excellent service and satisfaction. The MI-11050 is a professional tool and like all power tools, proper care and safety procadures should be adhered to.
Page 6: Features
MI-11050 WALL MOUNT DUST COLLECTOR PHYSICAL FEATURES...
Page 7: Proper Grounding
It is strongly recommended not to use extension Make sure that the machine is connected to an out- cords with your MI-11050. Always try to position your let having the same configuration as the plug. If an machine close to the power source so that you do adaptor plug is used, it must be attached to the not need to use extension cords.
Page 8: Unpacking & Inventory
Some parts come pre-assembled for cooling space. shipping purposes. ASSEMBLY To assemble your MI-11050 Wall Mount Dust Collector, follow the instructions given below. Align the holes on the motor bracket with the holes on the motor base and attach the motor bracket to the motor base using four bolts provided as shown in figure-1.
Page 9 If you are mounting the mounting bracket to a Installing the dust collection bag and secure it using framed wall, the bracket must be attached to a bag clamp (provided). See figure-5. support board that is wide enough to be mounted on two wall studs and having the capacity of holding the dust collector with collection bag full of dust.
Page 10: Test Run
TEST RUN OPERATION Now that you have assembled your machine MI-11050 wall mount dust collector designed to be completely, it is time for a test run to make sure that used with one machine at a time. the machine works properly and is ready for operation.
Page 11: Impeller
The MI-11050 features a collection bag with a clear window and a bottom zip. The clear window allows operator to see the amount of dust in the bag and...