1
2
3
3
4
EN GLI SH
Connect the mouse to one computer using the HP Unifying
Dongle.
To program the mouse buttons and connect to the dongle,
download the software. If the software does not download
3 m
automatically on your computer, open Microsoft Store.
Search for HP Accessory Center, and then download the app.
Programmable button
1
By default, press to use the Forward function in a web
browser.
Programmable button
2
By default, press to use the Back function in a web browser.
Scroll wheel
3
Scrolls the screen up or down.
Power light
4
White (5 s): The mouse is on.
Slow flashing amber: The mouse needs to be charged.
Solid amber: The mouse is charging.
Solid white: The mouse is fully charged and connected to
power.
Pairing light
5
Quickly flashing white (180 s): The mouse is in pairing mode.
Two blinks and pauses (180 s): The mouse is reconnecting
to a previously paired device.
Solid white (5 s): The mouse paired or reconnected
successfully to the selected computer.
Power switch
6
Turns the mouse on or off.
Pairing button
7
Press and hold the button for 2 s to enter pairing mode for
the HP Unifying Dongle.
PRINTER: Replace this box with Printed- In (PI) Statement(s)
as per spec.
NOTE: This box is simply a placeholder. PI Statement(s) do not
have to fit inside the box but should be placed in this area.
*N85411-003*
N85411-003
1
2
5
6
7
Need help?
Do you have a question about the 510 UF and is the answer not in the manual?
Questions and answers