Page 13
SERIAL NUMBER _______________________________________________________________ ASSEMBLY INSTRUCTIONS...
Page 14
PREPARATION ATTACHING THE HANDLEBARS ADJUST THE UPRIGHT TUBE HEIGHT ,...
Page 15
ATTACHING THE SEAT safety line safety line 1.Align the seat into the seat tube and lock 2.The height of the seat can be adjusted. it with the tube clamp When adjusting the height, it cannot exceed the safety line 3.Make sure the seat clamp is locked before use SEAT FOLDING 1.Press the latch and lift the seat...
Page 16
ATTACHING THE REAR CARGO BASKET 1.Align the bottom four pillars of the 2.After completing the rst step, fasten basketand put them into the holes the buckle on the tail on the shelf, and push them in the direction of the arrow to the end. 3.To remove the basket, follow the previous steps in reverse.
Need help?
Do you have a question about the SD and is the answer not in the manual?
Questions and answers