Download Print this page

Sabre HS-DSBA Manual

Door security bar with vibration detecting alarm

Advertisement

Quick Links

HS-DSBA
Introduction
Welcome to the SABRE family! This manual will guide you
through installing and using your Door Security Bar with Vibration
Detecting Alarm.
Follow the steps carefully to ensure your product performs
at its best.
What does the SABRE Door Security Bar do?
The Door Security Bar offers enhanced security for hinged &
sliding doors.
Key Features
Adjusts to fit most hinged and sliding doors.
Made of 20-gauge steel for durability.
Includes a 110dB vibration-detecting alarm to
alert you to potential intrusions.
Hinged Door Installation
1
2
1.
Press silver release button towards the bottom of tube (1).
2.
Slide the inner steel tube to desired length (2).
3.
Rotate inner steel tube so that the silver release button locks into
adjustment hole (3).
4.
Place the door knob cup firmly under door knob and slide the foot
towards the door until snug. The foot should be between 15" and 18"
(38.1 and 45.7 cm) away from the door (4).
5.
Do not place the foot on loose rugs or floor mats.
Recommended surfaces:
Hardwood Floors
Title Floors
Concrete Floors
Vinyl or Laminate Floors
Low-Pile Carpet
Sliding Door Installation
1
2
1.
Remove door knob cup locking pin and pull
door knob cup out of steel tube (1). The door
knob cup is not needed for sliding door
installation.
2.
Press silver release button towards the
bottom of tube (2).
3.
Slide the inner steel tube to desired length (3).
4.
Rotate inner steel tube so that the silver release
button locks into adjustment hole (4). When
properly adjusted, there should be enough slack in the fit so that the
SABRE® Home Series Door Security Bar can be quickly and easily
removed from sliding door track.
5.
Place the SABRE Home Series Door Security Bar in sliding door track
so that the door cannot be opened (5).
DOOR SECURITY BAR
WITH VIBRATION DETECTING ALARM
3
4
Avoid uses on these surfaces:
Thick or Plush Rugs
Loose Floor Mats
Wet Surfaces
Uneven or cracked floors
3
4
5
Where should I use my SABRE Door Security Bar?
Main doors of home
Bedrooms
Apartments
Dorm rooms
SPECIFICATIONS
Door Types
Hinged Doors and Sliding Doors
Size
Hinged Door Length: 28.5" to 45" (72.4 to 114 cm)
Sliding Door Length: 25" to 41.5" (63.5 to 105.4 cm)
Material
20 Guage Steel
Features
• Non-skid foot
• Adjusts to fit most doors
Hotels
Vacation Rentals or
Airbnb Properties
Offices
Door Knob
Cup
Adjustable Pin
Vibration
Detecting
Alarm
Non-Skid
Foot
11/18/24 | REV. V04

Advertisement

loading
Need help?

Need help?

Do you have a question about the HS-DSBA and is the answer not in the manual?

Questions and answers

Summary of Contents for Sabre HS-DSBA

  • Page 1 SABRE® Home Series Door Security Bar can be quickly and easily Foot removed from sliding door track. Place the SABRE Home Series Door Security Bar in sliding door track so that the door cannot be opened (5). 11/18/24 | REV. V04...
  • Page 2 To remove the back cover and access the batteries, use a • The SABRE® Home Series Door Security Bar is designed to be Phillips head screwdriver to remove the screw at the top of used as a security measure in addition to your door’s locking the alarm.