Page 19
Table of Content PAGE Introduction ............................. 1 Features ............................. 1 Handling Cautions........................1 Player Overview ......................... 2 Connect............................3 Feature Key of the Remote Control ................... 3 System Setup ..........................5 Basic Steps ..........................5 System Menu Items ........................5 Playing and Editing Files ......................
Introduction WARNING Be sure to power off the unit before installing and connect to devices. Welcome Support physical format discs & USB storage devices (U_disc, etc.) Congratulations on your purchase of the DVR (DVD Available media: DVD-Video, HDCD, SVCD, VCD, Recorder) system.
This manual only guides you to use the recorder number printed on the DVD disc does not correspond properly. If it is not uniform with the real product, to the region number of this unit, this unit can not play refer to the real product.
Connect ♦ Stop playing Feature Key of the Remote second press Control (pressing PLAY can restart playing). STANDBY PASUE/STEP Switch the unit standby on and off. Pause current process at OPEN/CLOSE the first press; go on step Open/Close disc tray by step at the subsequent presses.
Page 23
selected item on interactive menu During playback, press to scan in slow forward. Press to cycle through 1/2,1/3, 1/4,1/5,1/6 or 1/7x speeds. DISC/HDD/USB SUBTITLE Press it repeatedly the unit will switch the working mode to DVD/HDD/USB in turn Press the Subtitle-button to display the current subtitle status.
System Setup Basic Steps 1. Press the SETUP key on the remote to pop out the Note that once the System Menu appears, the System Menu. recorder system will auto pause. 2. Press UP/DOWN/LEFT/RIGHT to move the highlight to the item you want to set, then press ENTER.
Page 25
Audio Lang Six selections for Audio language: English, Chinese, German, Spanish, French, Portuguese. To select one, press UP/DOWN/LEFT/RIGHT to highlight a desired language and then press ENTER. Video Output Subtitle Lang YCbCr: Choose it if the unit is connected to your Seven selections for Title language: English, TV set with YCbCr video cable Chinese, German, Spanish, French, Portuguese,...
Page 26
Dolby Digital or MPEG disc, its audio data will be Tuning function should be run again if the TV channel modulated to dual-channel PCM data and distribution is changed by channel providers or the outputted from coaxial or optical jacks. recorder is re-installed.
Page 27
Disc Utility Stereo: In this mode, if it’s 5.1-channel sound playing, two channels of signals will be output The Disc Utility item can help you format storage from the left and right soundtrack; if it’s 2-channel devices: disc. sound playing, 2-channel stereo signal will be In DVD Mode output.
Page 28
then press ENTER; you will see a menu with old one, “Overlapped”; if no setup is filled in, Once and Repeat recording mode selections. “Empty”; if there is no enough space in DISC, After selecting one, you can set the date by “No Room ”.
Playing and Editing Files Playing Files in a USB Device In a USB Title List interface, the following three appear. You can select the file you want to play by the supported multimedia file folders are displayed. PREV/NEXT key on the remote controller and then press ENTER to start playing.
Page 30
Input text by UP/DOWN/LEFT/RIGHT and ENTER keys, and then press OK button to finish the rename operation. Protect Select the file you want to protect from the title list and then press EDIT, a menu will appear (as below). Delete Next select the Protect command from the menu and then press ENTER to protect the file.
Hide/Unhide Chapter the pop-up menu. A sub-menu will be expanded. During a program playback in Unhide mode, you can 2. Highlight SET A in the sub-menu, and then press press EDIT and then select Hide/Unhide Chapter on ENTER to specify a start point. the pop-up menu to disable the current chapter (but the chapter still exists).
Basic Operations the type, the PLAY or ENTER key should be Turn On the System pressed to start playing. Check to plug power cable in the recorder, then Play press POWER to turn the recorder on. If there is a disc in the tray, the TV screen will prompt “READ”;...
Page 33
again, it picked up where you left off. The Program Playback option allows you to enter the order in which you want chapters or − In stop state, when you press PLAY, the recorder enters sequence playback mode. tracks to play, maximum to 16. Notes: −...
Playing Other Multimedia Discs After placing a disc into the tray device (where the buttons are illustrated in the above supported files are saved: MP3/WMA/CD/VCD/ picture. The selected button appears red, while SVCD/DVD/MP4/JPEG, BMP, GIF, etc.), the recorder other buttons appear blue. When files of some will auto search the directories saving WMA, types are not saved in the system, the MP3/JPEG, BMP, GIF, and MP4 files.
Specifications Disc type Read: DVD-R, DVD-RW, DVD+R, DVD+RW, CD-R, CD-RW Write: DVD+R, DVD+RW, DVD- R (+VR logical), DVD-RW (+VR logical) Built-in USB Port Format DVD-Video DVD+VR Video CD Super Video CD Audio CD MPEG4 MP3 (maximum number of files recognizable: 999 files per folder, compression rate between 32 Kbps and 320 Kbps) JPEG (maximum number of pictures recognizable: 999 files per folder) Region Code of DVD video...
Need help?
Do you have a question about the JT1018RW and is the answer not in the manual?
Questions and answers