CONTENTS WARNING ................1 PREPARATION FOR USE ............2 IMPORTANT NOTES ..............2 MEET ADDO THE OWL ............3 WHAT IS IN THE BOX .............3 OVERVIEW ................4 READY-TO-RISE SLEEP TRAINER ........5 SLEEP TRAINING LED ............6 LISTENING TO BLUETOOTH SPEAKER ....... 6 SETTING THE CLOCK MANUALLY .........7...
WARNING 1) Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings. 2) Do not block any ventilation openings. 3) Do not install near any heat sources such as radiators, heaters, stoves, or other apparatus (including audio amplifiers) that produce heat. 4) If the provided AC mains adapter does not fit your outlet or is damaged, seek the advice of a qualified electrician before using a replacement mains adapter.
PREPARATION FOR USE Unpacking and Set Up •Remove the alarm clock from the carton and packaging materials. Retain the carton and packaging for future reference and in case the alarm clock radio ever needs to be serviced or transported. •Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers from the back or bottom of the cabinet, Note the serial number on the bottom of your radio and write this number in the space provided on the Warranty page of this manual.
10.BT Indicator READY-TO-RISE SLEEP TRAINER If your child is still young and cannot tell the time yet, Addo is a great clock to regulate your child’s sleep pattern. Addo uses dif erent colored lights and emoticons to teach your child when it is time for bed and time to wake up.
When it is time to wake up, Addo will greet your child with smiley, wide open eyes (as shown in Illustration 4) and the light around Addo’s face will glow BLUE! The Awake indicator will flash and the music begins play.
Automatic connection with your bluetooth devices is possible if they have been paired successfully with this unit before. After paired, you can play your music through this bluetooth speaker. Press the DIMMER/ button can pause or resume playback streaming over your bluetooth device. Note:If pairing unsuccessful, all previously paired bluetooth devices around should be disconnected first by pressing and holding the BT button untill it prompts,or turn off...
Press the “TIME” button again until the “DAY” digits flash. Press the “SET-” button or the “SET+” button to adjust the day. For instance, April 16th will appear as “4.16”. Setting the Time Format Press the “TIME” button again, until the “24H” or “12H” digits flash; Press the “SET-”...
Page 12
Press and hold the “ALARM” button and the “ ” alarm indicator and the “HOUR” digits will flash. Press the “SET-” button or the “SET+” button to adjust the hour. Press the “ALARM” button again and the “ ” alarm indicator and the “MINUTE”...
Page 13
6-7 on the Display Setting the Alarm Sound Press the “ALARM” button again until the “VOLUME LEVEL” digits (from 001 to 015) flash on the display. Press the “SET-” button or the “SET+” button to select the desired alarm sound from the following selections: a: 6 selections of white noise;...
Turn on/off SLEEP/AWAKE Activating and Deactivating the Sleep Training Alarm Clock Don’t forget to turn on Addo’s sleep trainer function after you’ve set it. To turn the sleep trainer on or off, press the “SLEEP/AWAKE” button repeatedly until the texts “SLEEP” and “AWAKE” appear/disappear on the display.
Half an hour prior to awake time, Addo's eyes are slightly closed, the yellow light around the face is on, and the "SLEEP" indicator flashes. When awake time is up, Addo's eyes are wide open, the blue light around the face is on, the music goes off, and the "AWAKE" indicator flashes.
When the nap time is over, the alarm sound will play and the yellow light around Addo’s face will glow, the eyes will blink constantly and the NAP . Press the “SNOOZE” button to turn off the indicator lashing on the display nap timer.
Press the “SET+/SET-” button to select your desired music or sleep sound. Press the “ ” button to loop your desired music or sleep sound, and the “ ” indicator will appear on the display. Press the “ ” button again to play all the music or sleep sound in a loop, and the “...
CARE AND MAINTENANCE Care of Cabinets If the cabinet becomes dusty, wipe it with a soft cloth. it the cabinet becomes smudged or dirty, clean it with a soft, slightly dampened cloth. Never allow water or any liquid to get inside the cabinet. Never use any abrasive cleaners or cleaning pads as these will damage the finish of your radio.
Page 19
RF Warning Statement: The device has been evaluated to meet general RF exposure requirement. To maintain compliance with FCC's RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. - 16 -...
Need help?
Do you have a question about the ADDO and is the answer not in the manual?
Questions and answers