Download Print this page

Bosch PLAYMOBILE Assembly Instructions Manual

Download this manual

ASSEMBLY INSTRUCTIONS FOR

PLAYMOBILE

Need help?

Do you have a question about the PLAYMOBILE and is the answer not in the manual?

Page 1 ASSEMBLY INSTRUCTIONS FOR PLAYMOBILE...
Page 2 You don't need a professionally set up workshop, nor do you require the know-how and skills of a carpenter to build the playmobile. A little bit of skill in the use of a drill, jigsaw and, possibly, an orbital sander is all you need to complete the job.
Page 3 Using two nails in a wooden strip, the wheels discs can be traced exactly. Now cut out with the jigsaw. Use curved saw blades. hole. When the upper thrust bearing, the steering wheel and the rear axle bearing have been secured, the playmobile is almost complete.
Page 4 The trailer is assembled according to the same procedure as the playmobile. Also in this case there are only flush screw connections covered by wooden dowels. To cut the threads, secure the aluminium...
Page 5 For those who need a playmobile designed for more robust use in the yard or on the patio, steel axles can be used and suitable plastic wheels instead of the wooden ones.
Page 6: Material List
ASSEMBLY INSTRUCTIONS FOR PLAYMOBILE MATERIAL LIST PLAYMOBILE Motor car Item Qty. Designation Dimensions in mm Material Seat board 440 x 200 Pine 18 mm thick Rear wall 310 x 200 Base plate 200 x 105 Reinforcements 430 x Steering bearings...