Advertisement
Table of Contents
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Symphony SY-DVR500
-
Page 2: Installation Notes
Friendly Reminder This manual is simple operating instructions, it may exist any technical describe inaccurate or misprint, also the contents will be update unscheduled without notice, new contents will be added in new version. We’re subject to improve or update product description or program, if any difference, all depend on real goods, please understand. - Page 3 Ⅰ Accessories List Device Model Name Quantity Unit Basic Network/AI MDVR ✔ ✔ Remote Control ✔ ✔ Power input wire ✔ ✔ AV output wire ✔ ✔ I/O wire ✔ ✔ Keys ✔ ✔ QC Card ✔ ✔ Manual ✔ ✔...
- Page 4 Ⅱ Device Introduction 2.1 Front panel function introduction Name Silk screen Functional Specification Power Indicator LED. LED on means powered has connected REC Indicator LED.It Flash when its Recording ① Indicators ② IR Receiver Infrared remote control receiving hole When electronic lock is locked, Device automatically SD Lock LOCK turns on;...
- Page 5 2.2 Back panel function introduction Name Silk screen Functional Specification AV Input Port AV1-AV4 1-4 Channels, with DC 12V output ① Standard for CVBS AudioVideo Output Port(It ② AV Output Port AV OUT can change into VGA Port) Devices with the suffix "-S2" support RS232 Input Voltage DC8-36V cable connect Power Input Port...
-
Page 6: Pin Definition
2.3 Audio and video interface Host aviation connector Interface Definition: Camera aviation connector Interface Definition: Ⅲ Main accessories instruction 3.1 Power interface definition This port connect to power interface on the back panel Pin definition FUNCTION Power+... -
Page 7: Remote Controller
3.2 Remote Controller IR Remote Control Buttons Functions Instruction as Showed Below: ①Power off key.This device does not have this function ②Login key.User login ③In setup interface, the number key is used to input numbers; For playback, 1/2/3/4 channel switching ④Delete Key.Delete the Character When Editing ⑤Switch from single screen to four screen... - Page 8 Step2: Install SD card According to the panel logo, insert the SD card Step3: Lock the electronic lock After installing the SD card, insert the key and turn the electronic lock counterclockwise to lock the MDVR.
- Page 9 Step5: Connect the power cable MDVR Use Direct Current Power to Input, Input Voltage range is DC8-36V ★ Use Ignition Switch to Control MDVR to Delay Work Red Connect Battery(Power) Positive Pole, Black Connect Battery(Power) Negative Pole, Yellow Connect Ignition Switch ★...
-
Page 10: User Login
Step6: Connect display screen This product supports 1 channel CVBS video output (can be changed to VGA output) Ⅴ Menu Settings 1.User login When the password switch is set to "Off": press the 【LOGIN】 to enter the system main menu directly. When the password switch is set to "On": press 【LOGIN】...
Need help?
Do you have a question about the SY-DVR500 and is the answer not in the manual?
Questions and answers