Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Gazelle GH2870
Summary of Contents for Gazelle GH2870
- Page 1 GH2870 Rotary Hammer User Manual...
- Page 2 ORIGINAL INSTRUCTIONS Before using this Gazelle Rotary Hammer, please carefully read though these HANDLING INSTRUCTIONS Ensure that you know how the machine works, and how it should be operated. Maintain the machine in accordance with the instructions, and make certain that the machine work correctly, please store this instriation...
-
Page 4: Table Of Contents
Drill bit Part of SDS max shank Hammer rod protector Flex Sheath Auxiliary handle Speed Adjuster Knob Power -ON Indicator Service Indicator Function Knob Cover Contents General Power Tool Safety Warnings Special requirements for rotary hammer Safety Instructions Applications Technical Data Accessories Prior to operation Assembly... -
Page 5: General Power Tool Safety Warnings
General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool. Work area safety a. -
Page 6: Special Requirements For Rotary Hammer
gloves away from moving parts. Looseclothes, jewellery or long hair can be caught in moving parts. g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust- related hazards. -
Page 7: Safety Instructions
6. If the supply cord of this power tool is damaged, it must be replaced by a specially prepared cord available through the service organization. 7. Do not touch the bit during or immediately after operation. The bit becomes very hot during operation and could cause serious burns. -
Page 8: Technical Data
Technical Data Model No GH2870 ID No. 01.02.0060 Rated Voltage 220-240V~ Frequency 50Hz Rated power 1500W No load speed 150-305 min Impact rate 1380-2760min Impact energy 2-15J Tool holder type SDS-Max Drill bit: Φ52mm Max. drilling Capacity Core bit: Φ160mm Optimun drilling diameter in concrete Φ25-Φ45mm... -
Page 9: Standard Accessories
Standard Accessories 1 - Carbon Brush 1 - Auxiliary handle Standard accessories are subject to change without notice. Optional Accessories (Sold Separately) 1. Through-hole drilling (Rotation + Hammering) 2. Tine Chisel (Hammering) :18*400mm(SDS max) 3. Flat Chisel (Hammering) :18*400mm (SDS max) 4. -
Page 10: Prior To Operation
Prior To Operation Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up use of this products. 1. Power source check Ensure that the power source to be utilized conforms to the power requirements specified on the product nameplate. -
Page 11: Operation
3. Regulating the number of rotations and hammering (Fig. 3) This Rotary Hammer is equipped with a built-in electronic control circuit that can adjust and regulate the number of rotations and times of hammering. This Rotary Hammer can be used by adjusting the speed adjuster knob, depending upon the contents of operation, such as boring holes into fragile materials, chipping, centering, etc. - Page 12 Switching On/Off in “hammering” Press the switch 3 towards ① direction Switch on Switch off Release the switch 3 towards ② direction If continuous Operation, Press the switch 2 towards “I” direction, to stop from the locked Position , just press the Switch 2 towards “0” direction. 2.
-
Page 13: Maintenance And Inspection
5. Warming up (Fig.10) The grease lubrication system in this unit may require warming up in cold regions. Position the end of the bit so makes contact with the concrete, turn on the switch and perform the warming up operation. Make sure that a hitting sound is produced and then use the unit. CAUTION: When the warming up operation is performed, hold the side handle and the main body securely with both hands to maintain a secure grip and be careful not to twist your body by the... - Page 14 CAUTION: Repair, modification and inspection of Gazelle Power tools must be must be carried out by a Gazelle Authorized Service Center. In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed.
- Page 16 sales@gazelleindustrial.com | www.gazelleindustrial.com...
Need help?
Do you have a question about the GH2870 and is the answer not in the manual?
Questions and answers