Do you have a question about the Y000-JN03-16 and is the answer not in the manual?
Questions and answers
Subscribe to Our Youtube Channel
Summary of Contents for SAFE HOME Y000-JN03-16
Page 1
PRODUCT WARRANTY User’s Manual Safe Home World DVR’s carry a warranty of 6 months on labor and 1 year on parts. Please contact Technical Support for any warranty related issues. To benefit from this warranty, you must return your product's Registration Card included with the unit.
Safe Home World DVR’s are manufactured to satisfy international safety standards. Review the The Safe Home World DVR is a Digital Security System designed to record/retrieve up to following safety precautions to avoid injury and prevent damage to the DVR or any products 4 channels of video at the same time.
This light indicates the DVR is recording. contents on the hard disk drive. If there is no unread event, then it plays the latest (This light is not available for model number Y000-JN03-16.) recorded video. For more detailed information about playback by Time Search...
Chapter 2: Getting to know your DVR DVR SIDE PANEL DVR BACK PANEL Removable hard disk drive drawer & keyhole There is a removable hard disk drive drawer and keyhole located on the DVR side panel. The drawer makes it easy to replace or install a new hard disk drive for recording. Some DC 12V DVR models have the hard disk drive drawer located on the front panel, however, the functionality and installation procedures are the same.
After installation of the hard drive, the hard drive drawer must be locked with the key The default recording setting for most Safe Home DVRs is set to EACH mode, 30 or the DVR will not recognize the hard drive. (Refer to Chapter 4 - Hard Disk Drive frames per second and normal video quality.
Chapter 4: Hardware Installation HARD DISK DRIVE INSTALLATION Some models do not come with hard disk drive. Check the chart located on page 5 to see if your DVR model comes bundled with a hard disk drive. The installation process is the same for all models.
Video Input/Output Connection (For TV / monitor screen display) If you’ve purchased a Safe Home DVR equipped with cameras and 60-foot cables, connect the cables to the VIDEO IN or CHANNEL IN terminal on the back panel of DVR Back Panel your DVR.
Page 9
Note: You need to have a HT-Series Safe Home DVR model and a camera with a Note: You need to have a HT-Series Safe Home DVR model and a camera with a built-in microphone for this type of connection.
The DVR has an internal switch for sounding an alarm. When a sensor is triggered, You can connect up to 4 motion sensors (not included in the DVR package) to the the alarm is activated as well. (Some Safe Home World DVR models may have DVR.
Chapter 4: Hardware Installation POWER CONNECTION LAN-DVR CONNECTION Connect the power adapter to the power adapter jack located at the rear panel of (HT-Series DVR models only) the DVR unit. You can connect your DVR to a local area network or to the internet. See the diagram below to make the LAN connection.
Note about Model HT-Remote-JN03-16: The images per second (or fields per Camera 3 Camera 4 second) ratings of Safe Home DVRs is based estimated performance locally or on a (Channel 3) (Channel 4) LAN. However, when events are viewed remotely via the Internet, the images-per- second rate of HT-Remote-JN03-16 could be as low as 0.5 images/second or 1...
Chapter 5: DVR Menu RECORD SELECT RECORD FRAME RATE To select cameras for recording, navigate to RECORD SELECT. To select cameras for recording, navigate to RECORD FRAME RATE. Then, use the buttons on the DVR’s front panel to select a camera for Then, use the select button to choose the desired frame rate for recording.
Chapter 5: DVR Menu SUB MENU RECORD SCHEDULE To change a password, set the time for your DVR, or to turn audio recording on or off, To schedule recording a specified times throughout the day, navigate to RECORD navigate to SUB MENU. SCHEDULE.
Chapter 5: DVR Menu SUB MENU - AUDIO CONTROL SUB MENU - PASSWORD CHANGE To change a password, navigate to PASSWORD CHANGE in the SUB MENU and press (HT-Series DVR models only) AUDIO RECORD & AUDIO MUTE options are available for HT-Series models only. the select button SELECT The following screen will appear:...
Chapter 5: DVR Menu HARD DRIVE FORMAT - PART A HARD DRIVE SETUP The following instructions apply to DVR units that came packaged with a hard disk drive. To setup your hard disk drive, navigate to HARD DRIVE SETUP in the main menu and If your DVR did not come with a hard disk drive, or you are installing a third party hard press the select button SELECT...
Chapter 5: DVR Menu SENSOR SETUP HARD DRIVE FORMAT - PART B To set up recording that is activated by a motion sensor connected to the DVR, navigate The following instructions apply to DVR units that did not come packaged with a hard to SENSOR SETUP.
Chapter 5: DVR Menu NETWORK SETUP SENSOR SETUP (CONTINUED) (HT-Series DVR models only) There are 3 different modes for sensor activated recording: NETWORK SETUP is available for HT-Series models only. 1. NOT INSTALLED (no sensors are connected to the DVR unit) If you plan to connect your DVR unit to a network, navigate to NETWORK SETUP.
Page 19
Chapter 5: DVR Menu NETWORK SETUP (CONTINUED) (HT-Series DVR models only) ABOUT NETWORK SETTINGS: NETWORK SETUP is available for HT-Series models only. ACCEPT CLIENT: If the ACCEPT CLIENT option is set as [YES], remote DVR access 1. When you first open the NETWORK SETUP window, the arrow will be next to control is enabled so you can control your DVR remotely via a LAN connection using the ACCEPT CLIENT.
Chapter 5: DVR Menu PLAYBACK CONTROL BY TIME SEARCH When you press the menu button during PLAY mode, the SEARCH TIME TO MANUALLY INPUT A SPECIFIC DATE AND TIME FOR PLAYBACK: MENU menu will appear as shown below. With this menu, you can choose and playback a 1.
Chapter 5: DVR Menu RESET TO FACTORY DEFAULT SETTINGS VIEW CONTROL DURING PLAYBACK To reset the DVR settings back to the factory default, press the pause button If you have set the RECORD MODE to EACH (see page 24), you can use the following 5 times.
2. What kind of sensor device should I buy for sensor recording? Under Menu and Camera Select, select 1. Any motion detection sensor will be compatible with our Safe Home DVR. 12. Can I record everything 24 hours 7 days a week without stopping? 3.
1 frame per second. For more information about recording Resolution Display NTSC : 720_480 capacity, see "Recording Time Table" in Appendix B or in the table of the Safe Home World DVR model list table in Chapter 1. PAL : 720_576 Recording...
15 K bytes / frame 12 K bytes / frame second) ratings of Safe Home DVRs is based estimated performance locally or on a LAN. However, when events are viewed remotely via the Internet, the images-per- second rate of HT-Remote-JN03-16 could be as low as 0.5 images/second or 1 image/second.
Need help?
Do you have a question about the Y000-JN03-16 and is the answer not in the manual?
Questions and answers